Radar CS GO - detailed setting. Radar CS GO - Detailed configuration How to put a standard radar in the COP

Radar in CS: Go is a very important component of the gameplay, as it gives information about the location of allies and opponents. Therefore, below we will show all the ways to configure the radar using console commands. And also we will tell about how to establish the designations of cards right on the radar.

Console Commands for Setting Radar

In order to start changing the radar as you need, open the console and register there:

cL_RADAR_ICON_SCALE_MIN 0.1. (standard 0.6 ) - changes the size of the icons on the radar

cL_RADAR_SCALE 0.4. (standard 0.7 ) - changes the size of the card on the radar

cL_RADAR_ALWAYS_CENERED 0. (standard 1 ) - The player ceases to be in the center of the radar

cL_RADAR_ROTATE 0. (standard 1 ) - Includes or turns off the rotation of the radar

Radar with card designations

We begin with what we need to download the designations for maps in Russian or English

We find the folder you need to:
C: \\ Program Files \\ Steam \\ SteamApps \\ COMMON \\ Counter-Strike Global OFFENSIVE \\ CSGO \\ Resource \\ Overviews

From the unzipped folder you need to move all the files with the replacement to this game folder.

Ready, now your radar shows the notation

You probably know about such a problem when the radar is turned off in the game in automatic mode. This happens immediately after the user updates the client. Of course, newcomers immediately arises the question of how to include radar in "KS 1.6"? In fact, this task is not the simplest.

Update

Radar in the game is one of the most important devices. Therefore, the user will be completely uncomfortable without it. The radar shutdown may be due to the fact that there are completely unique settings in the update, respectively, immediately after upgrading the client version, the user loses all its settings that were previously specified. If you carefully read this article, then the question of how can the radar can be included in the "COP", it will be easily resolved, and you will later know how to act in such a situation.

Failure

So, we turn directly to solving the issue, how to include the radar in the "COP". Immediately examine elementary capabilities, as most of the players who face this task are newcomers. Previously, you should check all the settings after updating the client, in some cases all your previously installed parameters can remain, but it is unfortunately, it does not always happen. If you have a question, how to include the radar in the "COP", then to act in a certain way. Of course, you can immediately be surprised that all the settings simply disappeared, but you should not worry about this, since everything can be very quickly restored, and for this you only need to carefully read the article to the very end carefully.

Algorithm

In order to achieve the result, you need to fulfill all the instructions given sequentially, then the question is how to enable radar in the "COP" for you will be as quickly resolved for you.

To begin with, run the client. We immediately go to the account settings, then click the "Game Settings" section. You should scroll the settings page almost to the bottom. There you can notice the section of the radar parameters.

In the next step, you will need to wait a few minutes until the mini card is returned. Now the most basic thing begins. We will make settings. At this point, you will also be able to find out the solution of the main question - how to include the radar in the "COP". In order to achieve the result, you will need to enter special codes, only in this way you can successfully complete the setting. You can activate the radar in the same menu where the mini-card is located. As soon as everything returns to the place, you can enter additional options for navigation.

More thin setting You can produce through special console commands. In particular, you can use one of the following codes: CL_RADARTYPE, R_RADAR, R_DRAWRADAR. With standard settings, you can turn on the navigation button N.

If the above commands did not work, use numeric values. It looks like this - CL_RADARTYPE "0", CL_RADARALPHA "150", CL_LOCATIONALPHA "150", Drawradar. Code CL_RADAR_ICON_SCALE_MIN 0.6 is also useful. It changes the size of a variety of designations on the radar.

Instruction

In order to make a small radius of the action on their own, use the following scheme. To create it, use a standard voltage stabilizer, infrared, microcontroller of the appropriate type, quartz resonator for 4 or 8 megahertz, switch, thirty-contact connector, 5 triggers of the appropriate type, batch board, tools for performing work with wires, solder, Wire 30 AWG, 36 indicators soldering iron.

You can purchase all these devices at special points of sale of radio engineering. You also need skills to work with microcontrollers. In the absence of yours, you simply will not be able to read the scheme.

Create a radar chip using the drawing on the link above. After that, follow the device assembly. Pick up the appropriate case drill 36 holes in it for indicators. After the radar is ready, skip each of its wire through the hole in the housing wall. Connect the infrared sensor and power supply to this device, place the antenna and go to the program part.

Perform the servo system in the form of interrupts and timers. Generate a 50 hertz signal, followed by the LED display device. These indicators are adjustable using triggers. Configure the update of this data system and subsequent output using an infrared sensor.

Use also a converter to determine the voltage. More detailed scheme of action of such devices is illuminated in special literature. Test your device, in case of faults, try to replace the components of the board.

Practice shows that in Counter-Strike, as a rule, it wins not one who better shoots, but one who is more correct and cunning behaves on the field. Obviously, it is almost impossible to carry out a more or less serious tactical maneuver without a radar that gives the minimum idea of \u200b\u200bthe battlefield.

Instruction

Check the settings. The presence of the radar is primarily determined by the corresponding check mark "Options" -\u003e "Interface", which you can set at any time of the game.

Use the console. Open the main settings window and the check mark opposite the "Activate Console" item. Go to the game (better in solitary, so that you are not distracted) and press the Kilda keyboard key (~). The command line that appears serves to enter internal commands: In your case, you will need Drawradar and Hideradar - actually turning on and off the radar. In addition, the CL_RADARTYPE # command is useful, where # is 0 or 1 - the transparency mode for minicards is turned on or off.

If the radar does not work after entering the console commands - download the HUD.TXT file from the Internet to the Counter-Strike game. Obviously, your instance was damaged or accidentally replaced by poor-quality. Place the new file in the game folder / CSTRIKE.

Friends, in this article, we will deal with you what a racar symple in the COP, its advantages over the standard radar, as well as I will show you how to set it.

What is Simple Radar and its advantages

The developers considered that the standard radar in the COP does not 100% correspond to the position of some textures on the maps. The standard mini card does not detail everything that is located on the game card.

The racar symp was made in such a way that you can see everything exactly as it really is. Each box is drawn, blue is highlighted under the roofs, such as apartments on Inferno or Mirage. Brown marked two-level places, for example, bridge from houses about T of the Repa and River on the first Midle Inferno, a balcony at the exit and houses on Mirage.

Simple Radar is not a read, as it replaces only the pictures in the game, and it does not interfere and change the operation of files that perform various functions, the radar is tested for me personally and hundreds of other players. Probability Get VAC - Ban for its use0% .

I advise you to pay attention to the article about, for the greatest benefits and comfort of the game with Simple Radar

How to install a racar symple

The installation is very simple and will take you no more than a couple of minutes.

• Download the archive ( the archive is taken from the official site of the Radar and flood here for your convenience)
• Unpack the downloaded rar file
• Go to your folder with the COP go, it will most likely be at this address. Local disk ⇒ Steam ⇒ Steamapps ⇒ Common ⇒ Counter-Strike Global Offensive ⇒ CSGO ⇒ Resourse ⇒ Overviews
• Copy the files from the unpacked archive to the last folder and confirm the replacement
• Run the game and enjoy a new radar.

To return the old radar back: We go to the Steam library, press the right mouse button on CSGO - properties, in the Local Files tab, click "Check the Cache integrity".

I did not know how to configure or optimize the radar in CS GO? In this thread, we just do the consideration of the radar settings in CS Global Offensive

What do we need for this? Everything is done very simply, and no additional software download us will need, everything you need is:

Enable console

If you have any problems with opening the console, then follow the following instructions:
one . Run CS: go
2. Settings → Game Settings
3. Enable Developer Console → Yes
four . Settings → Keylight / Mouse
five . Scroll to the bottom and see "Open Console" turns on on "` "- you can install any one.
That's it!

Radar setup

The first thing I would advise you is to create a game with bots so that they cannot kill you and already in the game to practice the radar setting. Let's start:

To enable Radar must register in the console team drawradar. ;
In order to hide Radar is used console team hideradar. ;

cL_HUD_RADAR_SCALE.
This command is responsible for the radar size on your screen.

Left:
cl_HUD_RADAR_SCALE "0.8"

On right:
cL_HUD_RADAR_SCALE "1.3"

Minimum: "0.8" // Maximum: "1.3"

cL_RADAR_ALWAYS_CENERED
The player is always in the center of Radar. At first glance, it may seem like a special difference and no, but plus is obvious - when you are in the corner of the map - you have a greater overview of the locality on the radar than if you were in the center of the Radar.

Left:
cL_RADAR_ALWAYS_CENERED "0"

On right:
cL_RADAR_ALWAYS_CENERED "1"

Two variables or 0 or 1 are available for selection.

cL_RADAR_ICON_SCALE_MIN.
This command changes the size of various icons on your radar.

Left:
cL_RADAR_ICON_SCALE_MIN "0.4"

On right:
cL_RADAR_ICON_SCALE_MIN "1.0"

Minimum: "0.4" // Maximum: "1.0"

cl_Radar_rotate.
The inclusion and disabling of the rotation of the radar. Those. If it is turned off, the card on the radar will always be in the same position.

Left:
cL_RADAR_ROTATE "0"

On right:
cL_RADAR_ROTATE "1"

You can set either 0 or 1

cL_RADAR_SCALE.
Change the scale of the map displayed on the radar.

Left:
cL_RADAR_SCALE "0.25"

On right:
cL_RADAR_SCALE "1.0"

Minimum: "0.25" // Maximum: "1.0"

cL_HUD_BOMB_UNDER_RADAR.
This command includes and also disables the display of the bomas icon when you carry it, or when you do not have it.

Left:
cL_HUD_BOMB_UNDER_RADAR "0"

On right:
cL_HUD_BOMB_UNDER_RADAR "1"

You can choose variables 0 or 1

Standard Radar Settings in CS GO:

cL_HUD_RADAR_SCALE "1"
cL_RADAR_ALWAYS_CENERED "1"
cL_RADAR_ICON_SCALE_MIN "0.6"
cL_RADAR_ROTATE "1"
cL_RADAR_SCALE "0.7"
cL_HUD_BOMB_UNDER_RADAR "1"