Rings from coins or jeweler's path enthusiast. How to make a ring of coins how to make a ring from a coin

Belongs to Nicholas Heckman. He independently took up the hammer and created such an accessory for his beloved. The girl was amazed, however, like all her relatives. Universal admiration so inspired Nicholas that he began to improve his creation and as a result released a whole series of original silver rings, but after that he stopped his business. To date, everyone will be able to do such a job for his beloved. The homemade ring will become an excellent surprise, because more valuable what is created with his own hands.

What is needed in order to make a ring from the coin?

First of all, you will need a plastic hammer, a rigleel, drill or any other tool with which you can do the hole. It may be, for example, a special device. Use what is convenient for you. To give shine to make sandpaper. It will come in handy after the completion of the main work.

How to choose a coin for a ring?

It should be noted that it must meet certain requirements. Main characteristics:

• strength;
• safety;
• the size;
• color.

Brass, silver, bronze and steel do not pose a danger to human health. That is why it is necessary to give preference to these materials. Copper and nickel can cause skin diseases and organism poisoning.

Pay attention to size. Little coins, a par value of up to 1 rubles, cannot be unambiguously suitable.

Make a ring yourself: first stage

First, decide which coins from which coin you will make a ring. An excellent material will be silver. Then warm it hot so that it becomes elastic, but do not overdo it with a heating temperature. Otherwise, the coin is deformed, and part of the elements can be lubricated. After she acquires a red shade and lightly turns, dramatically lower it into cold water. At this point you will hear hiss. Do not scare - this is a common phenomenon.

Go to the main job to make a ring from the coin with your own hands. Using the drill to do the hole. Watch it to be smooth. What it is more, the thinner the ring, but do not overdo it. Otherwise, the coin can burst.

The field of how you did a hole, you will need a plastic hammer and a riglel, thanks to which you can choose the necessary size and create a form. This tool is like a metal stick, which expands from the base to the end. Wear a coin on the beel and smooth hammer blows lower the ring down, stretching it. This is a very painstaking process. Try to gently knock on the product, otherwise it can be deformed. Gently bring the ring to the size you need. On the rigle there is a special markup. When you get to a certain level, remove the ring.

What you need to know?

To make a ring from the coin, it is necessary to use only a plastic hammer. If you take metal, risk damaging the smallest elements of the coin. Accordingly, the surface of the product will be uneven, even after processing with sandpaper.

Make a ring from the coin not easy, however, if you follow the rules, you will certainly succeed. There is another very important nuance. So that your product does not acquire a tapering form, take it from time to time from the rigleel and turn over. This is the hardest part, because it is not so easy to choose the necessary size as it seems at first glance. Carefully follow the outlined instructions, and you will certainly get a ring from the coin.

When you take off the product from the riglel, use forceps or pliers with a clip to not scratch it.

Safety regulations

When working with hot metal or silver, be sure to put on special gloves, because you risk burning. It should be noted that at the first stage of manufacture, when you work with a drill, you need to wear or a mask. Equip your workplace in accordance with all safety rules. When you make a hole in the coin, check the table sheet DVP.

Grinding

We ask the question of how to make a ring with a coin, you must carefully familiarize yourself with the manufacturing process. This article outlines all instructions in detail. As we have already said, the most difficult stage of work is to create a form. Grinding is the most pleasant process. When the ring is ready, you can plead to enjoy the fruit of your work. It remains only to give a gloss and shook the extra husk.

Create shine and bring beauty

In order for the surface of the ring to be smooth, you can make a few dozen shocks by an ordinary spoon. They should be light, otherwise you risk deforming the ring. To make it more even, use sandpaper or a special electric tool to eliminate outdoor flaws. The surface of the ring, whose photo you see below will get a flooded view.

It should be noted that there are several types of polishing tools: large grains and rough. Choose what is suitable as much as possible.

The production method that is used in this article is quite difficult, however, as a result, you will get the perfect product that will delight you over long. After polishing, you can decorate a ring of beautiful engraving or an original pattern. However, the result of your work depends on the efforts.

How to organize a workflow?

It is necessary to prepare a workshop where you will have everything at hand. Choose as the material minted coins made of soft alloy. Always remember this, because the preparatory process is no less important than the work itself.

What other technologies use to make a ring from the coin? As you know, several methods. The second can be used as an alternative. It begins with the fact that it is necessary to put a coin on the edge and cover some form. This will suit an ordinary spoon. This method of manufacture differs from the previous one that the coin does not need to be melted. Here it is necessary to splash the edge, causing strong blows with a hammer. It should be uniformly to process edges. Periodically, look at what happened. After the edges of the coin are spinning, drill a hole, but not to the end. Stop the drill before it passes through. Then treat the inside of the sandpaper and handle the outer surface.

How to make a ring perfect? Take the abrasive composition and apply it with a small piece of fabric. To achieve a mirror gloss, you should wipe several times. After that, prepare the capture, at the expense of which it will be possible to firmly hold the coin in hand. It is necessary that his sponges have a curved form. This will protect against dents and unwanted scratches. You can also use rubber felt or paper linings (any soft material is suitable).

The next step is to increase the opening in the center. Carefully make sure that the drill does not move to sorts, otherwise all the work done will go to the pump. At this stage it is necessary to gain patience. Neat and painstile movements select the rings circumference. After you made the ring of the required size, you need to align the inner part of the emery roller.

Creating a ring from a coin is a rather painstaking process. It requires accurate movements and following instructions. Technologies There are a large set. You can use various manufacturing tools. For example, you can take conventional pliers as a clip, wrapped them with soft material. This will allow not to damage the surface of the product. For polishing there are also many different machines that simplify the process.

The ring from the coin is the original and romantic gift. Any girl will appreciate such a wide gesture.

Now in fashion different unusual decorations. Things qualitatively made by their own hands emphasize the unusualness of their owner. We offer to get acquainted with the master class, how to make a ring from a regular coin.

When you make a ring from a coin, it is very important to first choose the coin correctly.

When selecting coins, pay attention to the following parameters:

• safety;
• strength;
• color;
• the size.

Do not pose a rings from coins made from materials such as silver, brass, steel, bronze. It is necessary to be careful with coins containing nickel and copper, as they can cause skin diseases, allergies and organism poisoning.

According to color scheme, coins are bronze-yellow and silver-steel. Bronze-yellow coins include Russian 10 and 50 kopecks, 1, 5, 10 and 50 rubles and Ukrainian 25 and 50 kopecks, 1 and 2 hryvnias.

It is necessary to pay attention to the size of the coin, since a large diameter ring cannot be made from a small coin. Not depending on the year of release in Russia, coins of such dimensions: small - with a par value of up to 1 ruble, average - from 1 to 10 rubles; Large - 5, 10, 20, 25, 50 and 100 rubles. In Ukraine, the size of coins ascending such: the smallest - 1.2 and 10 kopecks, then 25 and 50 kopecks, the largest - 5 kopecks, 1, 2 and 5 hryvnia.

For example, 50 kopecks of the USSR until 1931 are made of silver, American Dollar Sashagawa from the Bronze Alloy and make rings well with a large diameter, some EU coins are made of bronze alloys and a variety of sizes.

Ring from coins with your own hands: master class

You will need:

• coin;
• vice;
• power tools with nozzles for grinding and polishing;
• drill;
• steel spoon;
• metal platform performing the role of anvil;
• small grade sandpaper.

1. We put a coin on the "anvil" edge, we apply a convex part of a spoon and unsilent blows to it evenly throughout the edge of the coin. Periodically check the shape of the workpiece.

2. Stop when the edge of the coin becomes necessary for our width ring.

3. Using a nail or pointed subject, wealthing the center of the coin.
4. Drill the drill in a coin in the center of a small hole, stop the drill at once, as soon as its end passes through the coin. The drill is crossed in the metal, which will allow us to perform the next stage. Be careful because the ring heats up when drilling and can be burned.
5. We take coarse sandpaper, and turning on the drill so that the coin on the drill is spinning, process the outer parts of the rings. Then we take fine-grained sandpaper and repeat the processing.
6. We carry out the final processing of the outer surface. To do this, we take fabric, apply the abrasive composition and polish them the surface. To obtain a mirror gloss, we repeat this processing several times.

7. We clamp the coin into vice using the linings in the form of cardboard or paper for its protection against scratches and dents.

8. We increase the hole in the coin using the drill or other device. This is the most difficult and painstaking stage of work, since there is a chance to spoil the coin. It is necessary to do everything neatly, slowly, periodically checking the mount of the coin.

9. Using the power tools with a grinding roller, rush the inner part of the ring. After this stage, the edge of the product will be pretty sharp.

10. We pass in the edge of the product from all sides at an angle of 45 degrees until they become more rounded.

11. The polishing nozzle with a small amount of abrasive material is grinding the inner surface of the product, removing all the remaining roughness.

Our homemade ring from the coin is ready.

On the coins mines the year of manufacture. This means that you can make a ring from a coin with a significant date for you or the person who you will give your product. It will be an original thematic gift made to the same way. The method that offers the author of this idea is suitable for any coins.

To make a ring from the disc from the disk, it is necessary to do the hole in it and then deploy the obtained billet by the Morse cone. The smaller you do a hole, the wider the ring will turn out. However, the wide ring will be difficult to make it difficult, since when unfolding the coins will have to try not to break it and not minimize it.

Directly, the work on turning the coin is carried out with a stand with a wide opening. To do this, you can use the bearing, a pipe either or other device. Warming up the workpiece, you can protect it from the rupture. Experience has shown that a good tread, which is capable of protecting the inner side of the ring from damage, is paper. To pushing the workpiece, it is desirable to take an aluminum tube, as this metal is softer and does not hurt the future ring.

After creating a ring blank, only grinding of the product remains.

The second useful video of this wizard on the theme of the rings from coins.

As additional information, another video on the same topic, but already with the approach of the overseas master.

And here is another video lesson on this topic.

Unique decorations have always attracted attention, it is enough to remember which battles unfolded in the Lord of the Rings. In this video you will learn how to make a unique ring with your own hands from the usual coin. In our case, it will be ruble.

We note the center of the coin and make a hole in it. The resulting burishes with a drink with a wrinkle. Then we need to dress this workpiece on the metal rod. In the case shown, it will be core. Having focused on the board, we begin to gently overtake it and do it at an angle to the workpiece so that the side of the coin with the pattern began to turn outward.

Our workpiece has gross core and now for further bending of the sides of the money and increasing the opening, we apply an extracitted sleeve from the key and then the processed construction plumb is ideally better that the rod is one with an increase from small to large diameter. If there are vice, they will significantly simplify the task. But be careful, vice can spoil the drawing.

Pretty warm up and start to cow our. This process is very laborious and in one hour you can hardly manage. After we achieved the desired ring of the ring, I am scented with the ends on the grinding stone and then we will process the edges with a round file.

In the manufacture of the first coin, 2 errors that you want to avoid are allowed. The author of the roller did not immediately use the heating of the coin and stuck it too much, but it turned out but without a picture.

Let's make a second attempt. Let's make a ring from another coin with a par value of 1 ruble. We will make a hole, warmly warm up and begin to ride. We repeat this process until we obtain the desired result. After the ring accepted the necessary form, process the edge. Next, let's start carefully to take it, and then the most important thing is not to run the whole drawing. With some skill, many will have much better.

Nowadays, when someone surprise people is difficult, but I really want to make a stylish ring from a coin that will amaze others. Especially if you choose an unusual instance. For the first time, the rings were made of metal kopecks in America, and the man who did it was called Nicolas Hackman. It is said that when Lenin married Krupskaya, they exchanged rings from coins. Now this idea gives any good earnings to enterprising people, because such rings are sold for good money, and they are in demand.

There are two manufacturing technologies: one simple, and the second is a bit more difficult, but if you wish, everyone can master it, it will simply need a greater number of tools. Let's start with the one that is easier.

How to make a ring from the coin

Ring can be made absolutely from any coin. If you wish, you can take silver or gold. To turn the ring in the coin we will need:

• The spoon.
• Drill.
• Zeal.

In the process, each will appear additional tools that it will be convenient for it to perform actions at a certain stage. If a thick ring is planned, then the coin must be taken appropriate, for example, the Pynet, in general, it should be more than a finger. It is not recommended to take multi-layer penny, at least there is no sufficient experience in the manufacture.

So, begin. You need to take something metallic, you can, for example, a hammer or another flat piece of metal, to put a pen on the edge on top and holding with your fingers, beat the edge to her edge. You will have to do this for quite a long time, so you need to be patient. Only so you can understand how to make a ring from the coin and is it worth it. A spoon is better to take a massive to work more convenient to work. You need to beat about three times, then turn the penny and start working on the new site.

Nuances of production

In this matter, the main thing is to knock often, but not very much so that the surface from the blows expands gradually and was smooth. If you beat too much, you may appear dents that will spoil the whole look. Another nuance is that it is necessary to evenly tick the coin from all sides so that the surface is flattened uniformly. It is worth developing a rhythm and move in it all the time.

You need to continue to knock until a penny reaches the desired size. Making a ring from a coin requires a good eyelary. When the size of the decoration becomes visually close to the desired one, you need to start measuring the diameter of the calipers to comply with the exact parameters.

Drills Mint Ring

To drill a coin, it must be fixed. This can be done in a vice, pre-laying wooden bars in order not to scratch the surface. If there is no vice, you can take two pieces of boards, drill a hole in them to a millimeter or two less than a penny size. Connect two bars and make small holes under the tapping screw at the corners. After that, insert the ring between the boards so that through the drive drilled there was access to the coin. We fix it safely and, well holding this massive design, we drill the money. When you make a ring from the coin, it is better to put it before drilling so that the drill does not jump and do not scratch the surface.

Expansion of the hole in the ring

Without pulling out the mint ring from the clamp, you need to expand the hole in it. To do this, you can use a large drill or round file of a suitable diameter by inserting it into a drill. In short, if there is no special tool, then you just need to improvise.

Spit outdoor

Now it is already known how to make a ring out of the coin, and it remains to abandon it to the mirror glitter. To do this, you need to take a bolt and nut of the size, strongly approximate to the diameter of the inner circle of the decoration. We put it on the bolt, laying a piece of fabric, and then fix the nut. It is very important that the ring does not come into contact with the metal and did not scratch. We clash into the bolt drill, turn it on and spinning the ring, first on the small emery paper, and then on felt or tight fabric. So the appearance of the rings will become dazzling ideal.

The inner part is easy to stall, inserting a smooth segment in a drill instead of drill. You can keep the ring with pliers, pre-wrapped them with a dense cloth in several layers. That's all - the ring with your own hands made from the coin, now it is worth it for manually, and the fashionable accessory is ready.

Ring with an external pattern of coins

To turn out the pictorial image to the outside, you need to apply a slightly different approach. This method is more complicated, but the result is many times more interesting.

The manufacturer's scheme differs fundamentally from the first option. You need to immediately drill the hole in the coin of this size so that the rim corresponds to the thickness of the ring. After that it will need to be expanded using a metal cone. It is firmly installed, the coin is worn from above, which put a plastic tube and light movements be at the top. The coin gradually decreases, expanding at the same time. Having done these actions, you need to feel metal and follow the product to prevent the rings to break. After the coin dropped a little, it must be removed and heat. You can do this in the fireplace or with a gas cutter.

After a penny heats up, you need to continue the same actions as before that, only already with a split product. Everybody makes gradually, every time removing and heating the future ring. When a large circle, which is closer to the bottom of the cone, will become the necessary diameter, the product turns over and also in a split form is put on the cone. The work continues until both circles become the same diameter. That's how from a coin make a ring with a pattern on the outside. After that, you need to polish the ring, as described in the first method.

When grinding, it is not necessary to completely remove the entire nagar. With a combination of brilliance and nagar, the metal looks very effectively, and the pattern of the coin gives the ring a special charm. Such a stylish accessory will definitely notice all others.

Increasingly, there are photos of rings made of coins on the Internet, they look very nice and unusual but to buy such a ring is not so easy to come to the finger and cost it is not expensive. But if you adapt to a similar ring from a coin can be made at home with your own hands.

For the manufacture of a ring from the coin we will need:

• Coin;
• Vice;
• Drill with a set of dried;
• Blowtorch;
• Hammer or chisel (can be wooden with the ring get better, but the process will take longer);
• Metal tapered pins and metal-plastic pipes;
• Emery paper and gay paste.

How to make a ring from a coin with your own hands, step-by-step instructions:

First you need to outline the center of the coin with a kerner and hammer. Then we will need to drill the hole, for this you need to gently hold the coin. It is done so, two boards (one fine other than any thick thickness) or plywood in one of them is drilled by a hole, then put on between these boards, so that the planned center of the coin was exactly the center of the hole opening and these two boards are compressed by clamps All our coin is reliably fixed and you can drill a hole of a small diameter. After that, the hole needs to sand so that it was smooth and ready for further actions.

Next, it is necessary to heat up to the red coin with a soldering lamp or gas burner, it will allow you to "release" the metal and the coin will not break it with further unfolding it on the cone and makes it more plastic and militant. Then immerse it into the water.

Now we put our coin on the conical pin and begin to slowly beat the coin from above, turning it, it is better to use a wooden chisel for this, it will allow you to save the pattern of coins as possible, also in order to expand the coin you can take a pipe that is suitable for a diameter that Topped onto the pin and cautious blows on the base of the pipe, we farther and further fit the coin on the rod, increasing the hole to the diameter we need (under the desired thicker of the finger). We want to note that this most time-consuming and complex part of the work as at this stage you can easily damage the coin and will have to start again with a new coin.

After all this, we must get something like this:

So that the ring does not work out a cone-shaped form, during the molding it takes it from time to time to shoot and turn over. I bring it to such a state. To remove the cone shape and it has become the necessary diameter.

If, after the work done by us, the ring began to meet our requests and the drawing remained uncountable, then you can proceed to the next final step - polishing. This can be done in different ways, for example, using Dremel with the right brushes and polishing circles with paste gay. You can also manually polish it, the main thing is not to spoil the drawing. Before polishing, the ring is better to warm up and throw into the water when the scale will come down. The drawing will appear better.

Thus, from the coins, you can make various thicknesses (wide or thin) rings, those who seriously engage in the creation of rings from coins buy collectible coins for their work, but if you are just a beginner, the first ring from the coin is better to make from more accessible coins, since Great risk to spoil it. This is far from the only way to make a ring from a coin, and others can be found on the network, but it is probably the most affordable of them.

Examples of work rings from coins: