Bind for a long jump in the cop. How to change the jump on the mouse wheel in CS: GO. Is it possible to bind a jump by pressing a mouse roller

Do you want to bind a jump on a wheel in cs go? It is very easy to do this:

• Open the console
• Write the command bind "MWHEELDOWN" "+ jump"

If you want to bind the wheel up, then you need the bind "MWHEELUP" "+ jump" command.

Well, if you don't understand anything, then read the details below.

Commands for bind on the mouse wheel in the game cs go

Let's start with the main command that we will write in the console. It's called bind "MWHEELUP" "+ jump". It literally means the following: "put the jump on the wheel up." Those. now when you scroll the mouse wheel up, you will jump, but there is one problem - now when you press the spacebar, nothing happens.

How to bind a jump to the space bar and the wheel in cs go

There are two main ways in which you can bind the jump to the spacebar and the wheel at the same time. One is very boring, the other is very simple (but for some reason it sometimes fails). Let's start simple.

Go to cs go and open the settings. Find a jump there, press change and roll the mouse wheel up. Fine. Go to the bot game and check if everything worked. If so, now open the console and type in the following:

bind "space" "+ jump"

Thus, we tell cs go to first put the jump on the wheel up, and then also on the space bar. If suddenly something did not work for you, then you will have to go the hard way.

We need to find the config of the game, which is located at: Steam / Steamapps / Common / Counter-Strike Global Offensive/csgo/cfg/config.cfg

Open it with a text document. Press ctrl + F (command to search for words) and write jump. The found line must be changed to this: bind "MWHEELUP" "+ jump". Click save and check if something has changed in the game.

How to put a jump on 2 buttons (up and down)

Sometimes there is a need to set a jump both on the wheel up and on the wheel down. To do this, we need to add one more bind "MWHEELDOWN" "+ jump" to the above command. Everything, nothing else is required from you. Now, when you scroll down, you will also jump.

Simple jumping technique (banihop)

I have a separate article about banihop, but let's briefly go over how it is done. To jump, you need to accelerate, release the forward key and do the following: jump + left key + left mouse -> jump + right key + right key.

It sounds creepy, but in fact, you will quickly figure out what's what. Yes, it takes a lot of time to bhop well, but one day of practice is enough to overcome 2-3 meters.

Binds FAQ

How to remove the bind of a jump on a wheel?

I know of two ways. Write bind "l" "+ jump" in the console, i.e. we will stupidly transfer the bind to another key, which we do not use anyway. Or go to the config.cfg file (which is in the root of the game), type jump into the search and delete this line.

How to bind a squat on a mouse scroll?

To do this, go to the settings, find the line "squat", press change and scroll the mouse wheel down. All is ready.

Is it possible to bind a jump by pressing the mouse roller?

Yes, you can. Again, either in the console or in the config, we write the following command: bind scroll "+ jump". All is ready.

Bursting(English bunnyhopping) is one of the tricks in first-person shooters that allows a constantly jumping player to effectively dodge enemy fire and / or move faster than without jumping. Jumping helps to dodge bullets, increases movement speed, drowns out footsteps.

Jumping in CS: GO

I) Jumping with commands in the console:

sv_staminajumpcost 0
sv_staminalandcost 0
This method is simple, but does not work on Valve servers, it can be used for training, but it is better to use the following method.

II) Manual jump:

First you need bind jump cs go wheel, but it can be any other button, but the mouse wheel is more convenient when jumping. To do this, turn on the developer console and enter one of the following commands:
bind "space" "+ jump"- This is a standard jump for the gap.
bind "MWHEELDOWN" "+ jump"- Jump down on the mouse wheel.
bind "MWHEELUP" "+ jump"- Jump up on the mouse wheel.

This method is often used professional players... After these manipulations, we need to practice and understand the physics of jumping. To start training, create a lobby without bots and perform 3 exercises that will help us jump.

1. Jumping to the beat:
At this stage, we just need to do long jumping cs go... Our task is to get used to jumping. It is worth noting that we need to press the jump at the moment of landing, otherwise the character will stop.
2. Jump in a semicircle:
At this stage, we will have to jump, just like in the first stage, but now we have to press right and left. However, this is not all the same, it is necessary to turn the mouse in the direction of the jump, that is, we pressed it to the left, then we turn the mouse to the left, we pressed it to the right, and then we turned the mouse in the same direction.
3. Jumping without acceleration:
Now we just stand in place and start jumping, just as in the first exercise, in time with the jumps, press right and left and move the mouse in an arc or semicircle. If everything goes right, we will start moving and eventually start jumping around the map. We can assume that we have mastered jumping.

III) Using Macros... This method is forbidden and cheating, it is also not the easiest one, since this method requires binds for cs go to jump and programming skills and a head that is quite well versed in this area. We will not analyze this method in detail, but I will say that you need a mouse that supports macros like X7.

How to make high jumps inKSGO?

To jump high in CS: GO it is enough to devote a few minutes a day (it all depends on you) for a little workout. To do this, just jump and hold Ctrl while jumping, it is best to do this while taking off, this will help you climb high objects that are difficult to reach. Also, if you are playing in the lobby, you can use the following console command: sv_gravity... The standard value is sv_gravity 800, to make high jumps in cs go we need to lower the values sv_gravity. However, it is worth remembering that this method only works in the lobby or on a dedicated server.

How to make long jumps inKSGO?

For a long jump, you must definitely be able to do Strafe (the main trick of physics in CS 1.6 is to jump in an arc, that is, you can go around obstacles) and MultiStrafe (It is one of the most useful but difficult jumping techniques). With a long jump, you can take very good and important positions. But there is one drawback, long jumping cs go- This is the hardest type of jump. To begin with, accelerate in front of the abyss, and press the left Strafe, a few fractions of seconds before the jump, begin to smoothly move the mouse to the left, jump. Once pushed off, do MultiStrafe. At the very end of the landing - press sit down to slightly increase the distance. The training of this jump is very hard and long, however, it brings many advantages in the game.

And so, you have been looking for a long time, and perhaps not, but otherwise it does not matter, you found this article, in which we will tell all the answers to your questions. And so, let's not drag out your patience, let's start. So how do you bind a cs go wheel jump?

How to bind a jump on a wheel in cs go

Let's take a look at what a bind is and what is it for? What it is: Bind, bind from English bind - binding abilities / keystrokes to mouse / keyboard / joystick keystrokes. For example, "bind the jump on the wheel" - make the character jump when you press the "wheel" key.

What they are for: Binds are needed first of all in order to speed up their actions, as well as to gain relative advantage over the player. Basically, binds are used in Valve games, namely, in the games of the CS (Counter-Strike) series, they also have another name, macros.

And so, after we have figured out what and what binds are for, we need to find out how we can bind them? To bind a command in a CS: GO game, we need to unlock the console, by default it is locked, to unlock the console in the game, we need to do the following:

To use console commands, you must first follow the steps below. All commands are entered from the console in the game. The console is hidden by default. To activate it, follow these steps.

1. Go to the game.

2. Click on >> Settings >> Game Options.

3. In the >> Enable Developer Console tab, select Yes.

5. Scroll to the bottom and select the button for the console.

Open the competition mode, or start any other game mode, the main thing is that you have already been present on any map. Open your console. At the command prompt, enter the bind mwheeldown + jump command. Execute it (Press Enter). And jump on a wheel will work in cs go.

After that, the character will jump when scrolling the wheel down. If you want to make this action happen when scrolling up, then replace part of the mwheeldown command with another - mwheelup.

How to put a jump in CS: GO on 2 keys? Space and mouse wheel

This action can be performed in the following way:

We need to bind the jump to the wheel with the command bind "mwheelup" + jump (Jump occurs when scrolling up), bind "mwheeldown" + jump (Jump occurs when scrolling down;). Or write everything with one bind bind "mwheeldown; mwheelup" + jump
The jump will be on the space, as it is in the default settings and on the wheel.

To unbind, you need to write "unbind" instead of "bind". For example: "unbind" mwheeldown "+ jump".

There is another way:
For the second method, we need to go to the root folder of the Counter-Strike: Global Offensive game, for this:

1. Right-click on the Steam icon in the tray and select Library;

2. In the library, select the Counter-Strike: Global Offensive game, right-click and select Properties;

3. Select the Local files section and click on "View local files"

4. We opened the root folder with the game, now go to: "csgo> cfg" and open the file "config.cfg" (config_default) using notepad or NotePad ++ or any other editor;

5. We are looking for a line with the name "jump" (for a quick search, press the combination on the keyboard "CTRL + F" and drive into the search "Jump";

6. Add under the line "bind" SPACE "" + jump "" the command bind "mwheeldown" "+ jump" or bind "mwheelup" "+ jump" (jump one scroll down or up, respectively);

Save the file, go to CS: GO and check. How does jump work in cs go?

What is useful to know about binders

Binds can increase your purchase speed several times, for example: you can bind the purchase of a certain weapon in the store. You can bind certain commands to the chat, which on some servers significantly save your time, and you will not need to register them every time in the chat, at the beginning of the round, I'm talking about servers such as:, and others like that. You can bind almost anything your heart desires and that is not prohibited by the game. Now I will give some examples of useful bindings.

And in conclusion, I would like to add, guys, use bindings, this is a very useful function of this game, which will significantly improve your playing skills and possibly increase the so-called "skill".

Did you manage to bind and jump on the mouse wheel works in cs go?

In order to play Counter strike to have at least a minimal advantage, users use different methods. One of them is to bind the jump wheel. At least there are different methods of how to bind a jump on a wheel.

Why do you need this at all?

Previously, the wheel was used to change weapons, but this is extremely inconvenient, because it is easier to press a button. However, the wheel should not be idle. Therefore, users install a jump on it.

The peculiarity of this method is not a jump as such. It always stays on "space" and is used when it is necessary to jump over an obstacle. But the wheel allows you to jump for a fraction of an instant, as a result of which the player does not hang in the air, but simply jerks up and down. Someone believes that such a method (twitching the player) knocks down the enemy somewhat, which makes it more difficult for him to hit you. But actually it is not. The enemy doesn't care, but it becomes a little easier for you as a player to aim. It's hard to explain why, but it is.

Also, such a small jump allows you to see something behind a box or obstacle. In this case, a full jump will completely give you away, because When jumping, the player hangs in the air for 0.5 seconds. This does not happen with a conventional bounce, which is mounted on a wheel. Therefore, most players want to know how to bind the jump wheel. This gives a small and dubious, but advantage in the game.

There are at least 2 ways to bind the jump wheel. Both simple and working.

Method one

Just open the game, go to "Settings" - "Control" - "Keyboard". We are looking for the item "Jump" there, select it, press "Change" and turn the wheel (up or down). As a result, "Jump" will be assigned to two buttons: the spacebar and the wheel.

The second way, how to bind the wheel for a jump

If you do not want to go into the settings, then you just need to write the command in the console. Open the console ("~" button) and write there: bind "mwheelup" + jump. The bounce will now be activated when the wheel is scrolled up. It is much more convenient to assign it to scroll down. If you write mwheeldown instead of mwheelup, then the jump will be activated when you scroll the wheel down. Now you know how to bind the jump wheel. Use these methods. Perhaps they will provide an advantage in the game.