Configuring bios for SSD or how to properly configure the computer after assembly. Independent assembly PC. The first turn on the computer without OS. Configuring bios for SSD or how to properly configure the computer after assembly why the minecraft assembly does not start

"Minecraft" is one of the most popular and successful games to date. Millions of people play it to which new users are joined every day. Here you have no specific tasks or goals, scene line or quests. Before you there is only one important question: "How to survive?" It is it that you will decide all the game time, and if you have a good deal, you can also work in creativity - to equip your home, build decorative designs, experiment with mechanisms. All this can be done using a clean game client. But many gamers are asked how to set the assembly to the "minecraft". And novice players immediately arises the problem. They do not understand what it is generally for the assembly. It is best to deal with this issue gradually.

Modifications for "minecraft"

If you hear the question of how to set an assembly to the "minecraft", then most likely we are talking about the assembly of mods, which will allow you to get much more pleasure from the process. Fashion is special add-ons written by the developers themselves or fans that add certain functions, items, materials, recipes, and so on to the minecraft. Naturally, the game itself has enough freedom for creativity, but there is no limit to excellence, and modifications allow you to diversify your client with various innovations.

With the help of mods you can fly to the moon, create incredible mechanisms, equip the house with beautiful furniture, get a car and much more. Therefore, you should not neglect them, only consider that in multiplayer mode on some servers you cannot use modifications, and if it is possible, only those that are defined by the administration. But this does not answer the question of how to set the assembly to "minecraft".

Assembling mods for "miniskraft"

As you understand, modifications are issued by various people, loaded into different resources, and you need to search, download separately, install, check the work. This is all not very convenient, and that is why the players very often ask how to establish an assembly to the minecraft, because it is much more practical. In one assembly can be located all useful mods, proven and working that you do not need to be separately loaded into the client.

You yourself can choose the modifications that will be contained in the assembly, after which only one download - and you have on your computer. You have the opportunity to download the "minecraft 1.5.2" assembly and other versions, but there are universal, which can be installed on any game option.

Accommodation on the computer

Another popular question that is specified regarding modes of mods: "How to put an assembly on" minecraft "?" Where to put it? If you play in this gameYou should remember that almost all manipulations that you make with the client without entering the game are carried out in the folder .minecraft. If any assembly has already been installed, do not forget to remove it. Of course, you will have the opportunity to choose one of the assemblies at startup, but it is much more convenient to use the same one, since the presence of several can lead to a certain failure to work. Try to minimize the entire third-party content that you attach to your client.

Installation setting

When you already downloaded the assembly you needed, I unpacked it into the folder with the game, it's time to run it. You will have to create a new profile to which a specific set of mods will be applied. You can choose it in the versions window - there you are offered to decide on the one you want to play. Suppose you have a client 1.5.2, but you will be offered both this option and all those that were before it. And after adding to the folder of your assembly will appear in the list and it. Choose it and then launch the game - now you will get a lot of pleasure, as a lot of new and interesting will appear in the Mininraft. You really look at this game, and fresh recipes and objects, their study and use will take away from you far from one hour.

Creating your assembly

What other people do can easily borrow and use. But it is much more pleasant to do something alone, and then enjoy the result of your own work. To do this, you need to find out how to make an assembly on the "minecraft" with your own hands. In fact, everything is quite simple, as most of the work is still done for you. There are several platforms to install modes on them, the most popular among which is forge. You can download it, you can make a choice in favor of another, for example, MODLOADER - it does not matter. After it is installed, you will find another MODS folder in the folder with the game in which you need to write all those modifications that you would like to see in the assembly.

I have work with a Jenkins pipe called "Testpipeline". I want to launch an assembly on two different slaves, which are indicated as "Tester1" and "Tester2". And the script of the conveyor here is quite simple:

Node ("TESTER1") (Build "test_job") node ("TESTER2") (Build "test_job")

However, when I start the task Testpipeline, "test_job" will not be performed on the nodes that I prescribed. But instead, perform on the random node. P\u003e

I wonder if I need to install "limit where this project can be launched" on my "test_job". Therefore, I installed it on the "tester" (Tester label contains both "Tester1" nodes and "tester2"). But when I start working with the conveyor, "test_job" starts twice to "Tester2". I have to expect that the work will begin first to "Tester1", and then starts to "Tester2". Why is this? This is because the step "node" does not matter when it comes to what node should build a collection of assembly?

Set Andy Wang 07.07.2016 at 10:37

3 response

See here. The decision is as follows.

1. In the Test_Job configuration, select "This Assembly is parametrized" and add the "Label" parameter and set the name of the parameter to "Node"
2. In the conveyor script, use the code:

Build Job: "test_job", Parameters: [[$ Class: "LabelParameterValue", name: "Node", Label: "Tester1"]] BUILD JOB: "test_job", Parameters: [$ Class: "LabelParameterValue", Name : "Node", Label: "Tester2"]]

And work will be built as I wanted.

butI think this is just a workaround. I still believe that this is a mistake. Since the node step must do its work, and not allow other plugins to do it.

The answer is given Andy Wang 07/13/2016 at 11:14

I did the same, but using the Node parameter, so I can directly use the node list task or run the conveyor (in the conveyor I use the Choice parameter to have a list of available nodes). Therefore, in my case:

1. Install the plug-in settings of the node and tag
2. In the test_job configuration, select "This Assembly is parametrized" and add the node parameter and set the parameter name to Node_Name
3. In the conveyor, add the Choice parameter, name it Node, put the possible options there, so when you start the conveyor you can select on which node it must be running.

Code to insert into the conveyor script:

Build Job: "My_job", Parameters: [[$ Class: "NodeParameterValue", name: "node_name", labels: ["$ node"], nodeeligibility: [$ class: "allnodeeligibility"]]]

Build a computer - a fascinating occupation. In addition, it saves the budget. You can't hire yourself to build a computer and pay for 10 - 15 thousand rubles. (When assembling the game PC with respect to the shop price).

Collect the computer itself is not a tricky thing. From the tools only the cross screwdriver is needed. But what to do next when all the details are screwed into place? What to do after assembling the system unit? How to start a computer after assembly? How is the BIOS setting up for installing Windows 7 on SSD? How is Windows installing after assembling a computer?

At first glance, there are a lot of questions and from surprise can be confused. But the good news is that the times have long passed that only professionals could figure out this. Today, almost all of these works are automated. And if you observe a certain sequence of actions, then anyone with a technician mind can be understood.

Let's look at the first inclusion of the newly collected computer on the example of the popular budget configuration for games (game computer) and photo processing in the RAW format (computer for the photographer). The article will also be interested in those who are looking for answers to the questions: "How to start a computer after replacing the motherboard?" Or "How to start a computer after replacing the hard disk?" Since the BIOS is on the motherboard, and Windows is installed on a hard disk or solid-state SSD.

So, we have a system on the following components (which I collected):

• Intel Core i5 6500 processor, LGA 1151 Box;
• MSI H110M Pro-VD LGA 1151, MATX, RET motherboard;
• Operative memory kingston Hyperx Fury Black Series 16 GB;
• Drive SSD OCZ TRION 150 TRN150-25SAT3-240G 240GB, 2.5 ", SATA III;
• Hard disk 1 TB WD Caviar Blue;
• Optical drive DVD-RW LG GH24NSD0, internal, SATA, black, OEM.

This configuration is enough for photo processing (the built-in graphics core Intel HD Graphics 530 is used). In order for the computer to become super game, you must add a video card to your wallet. The best option There will be a GeForce GTX 10 series. But on the first turning on the computer, the presence of a video card does not have any influence.

We will put the operating system on the SSD solid-state disk, and the hard drive will be reserved to store various files. Therefore, it is very important that when you first turn on the hard drive has been disconnected from the motherboard. Then the system itself will configure many parameters to work on solid-state SSD. We connect the hard drive later later, the means already installed windows. This is a standard procedure that does not cause difficulties.

In the general case, the first inclusion of the computer after the assembly consists of the following steps:

• configuring BIOS and update firmware (if necessary);
• installation of the operating system;
• installing drivers of incoming components;
• installing software.

So, the computer is assembled, go to the configuration of the bios.

Configuring BIOS MSI H110M Pro-VD UEFI to install Windows 7

When you turn on the computer, the first thing to pay attention is that the fans began to spin: on the processor and on the system block case, the bulbs were frozen on the front panel, the monitor came to life. These are the first signs that everything goes as it should.

The appearance and location of the BIOS menu depends on the system board manufacturer (motherboard). In this case, we deal with MSI UEFI. To get to this utility you need when you turn on the computer, click on the Delete key on the keyboard.

If all the wires and components are in their places, you will see the first tab of the BIOS called the state of the system. If there is nothing on the monitor, you need to check all the connectors on the reliability of the contact or search for a faulty component. You need to dig in electronics of the system unit when power off. In addition, the H110M Pro-VD board has 3 LEDs, which every time starting the system light up if there are problems in operation: processor, random access memory and video cards.

System Status: Check Detected Devices

Setting up MSI bios to install Windows 7, as, however, for Windows 8.1 or 10, it begins with the fact that in the first line System Language you need to select Russian. After that the interface will be Russian. Next, you can set the system date and time. But you can leave as it is, because at the first exit to the Internet, the computer itself will set the correct date and time. Below you need to check that the computer saw all your SATA devices. In this case, you can see two connected devices (as it should be):

• SATA port 1: solid-state SSD drive: Toshiba-TR150;
• SATA port 2: missing (disabled hard disk);
• SATA port 3: DVD Drive: HL-DT-ST DVD-RA ATAPI;
• SATA port 4: missing (free connector).

For the first time I did not turn out the optical drive in the list. I turned off the computer and checked the drive connector - it was not completely inserted. Dropping a connector for another 3-4 mm until it stops, I turned on the computer again. Now the optical drive was in its place.

In the line, the physical memory is present 16384 MB - it means all the memory was determined. The MEMORY Speed \u200b\u200bline costs 2133 MHz - memory operates on the claimed frequency.

More here we are especially interested in anything. Next, you can take a walk on all tabs to see what is there. Find a screen with processor temperatures. It is important that the temperature be within the normal range. For i5-6500, the maximum temperature is 71 ° C. This is under load. And in a simple somewhere 30-40 ° C. And then suddenly you have a bad contact of the processor and fan. Then you need to check the quality of the installation of the processor cooler.

Go to the second tab additionally. Select there embedded peripherals and see the mode in the SATA line stood. This setting is needed when installing Windows on a solid state SSD disk.

Checking the inclusion of AHCI mode when installing windows on SSD

In the same tab additionally, in the Windows OS Configuration window, we switch to Windows 7 Installation on the on. If you put Windows 8.1 or 10, select the item of the same name on this screen.

Selection of Windows installation option 7 or 8.1 (10)

Go to the 6th Loading tab (BOOT). In the picture, everything is written in English, because selected english on the 1st tab, I specifically did so to show what it looks like english version BIOS interface. It is important to set the options for the download queue, that is, in what sequence devices will be interviewed for the presence of boot files. This is the configuration of the BIOS to install Windows 7 (8 or 10) or from a disk or from a flash drive or USB. I set the classic scheme: first the DVD drive is checked, then solid-state SSD disk. We will install Windows 7 with DVD disc, so the built-in DVD drive is first in line. After installing Windows, we remove the installation disk from the drive. The computer will check the DVD drive, will not find the boot files there and go to the second device: the solid-state disk on which Windows will already be installed, therefore the operating system will be downloaded. With this scheme, it is not even necessary after installing the OS, turn off the download from the DVD in the BIOS. Everything will work and so.

If your OS is installed from a flash drive or from an external DVD drive connected via USB, then the first to the download queue must be selected the corresponding USB device, instead of the built-in drive DVD.

Configuring the BIOS to install Windows 7 from the disk

Next, we go to the last tab of the Save & Exit (Save and Exit), save the settings and exit from bios. But before you get out of the BIOS, you need to open the DVD drive and insert the Windows 7 installation disk to the drive, because we cannot do this on the off-off, and we need the disk to drive to the drive before the computer is turned on. Starting the drive is not necessarily, because after turning on the computer, it will definite.

Now everything is ready to install Windows 7 to a computer. About how to do this in the next, my own hands.

Minecraft is one of the most popular today. computer games. It is difficult to explain the popularity of it, it was created in a primitive style and was developed in a week, but for some reason the toy received unprecedented folk love.

Minecraft supports the installation of "top" games of modes of modes, allowing to expand the functionality, and in this article we will deal with how to set the Minecraft modes on the PC.

Why do you need fashion?

Fashion in minecraft, as we have already mentioned, expand the functionality of the game. One mod can provide new armor your character, the second - space ship With additional resources, and the third add the possibility of building a number of new buildings. Of course, newcomers in minecraft and without mods will not be bored, but after a while any player wants to expand the possibilities and make a new interest in the game. Here it is necessary to establish mod.

Download mod

Of course, before installing the mod, it must be downloaded. However, caution is required here - it is impossible to forget that, together with the mod, you can download a virus that can harm not only your game, but also in general the security of the computer.

Here are some proven sites: MinecraftForum.net, Minecraft-mods.Ru, MinecraftMonster.ru, Ru-Minecraft.ru. On all these fashion sites can be downloaded completely free, but in some cases registration may be required.

Install on your computer

1. Open with WinRAR file Minecraft.jar - Computer / Local Disk / Users / AppDate / Roaming / .Minecraft.
2. Go to the folder to which the downloaded mod and copy its contents in Minecraft.jar.
3. Delete the META-INF folder from minecraft.jar.
4. We save changes.
5. Run the game - if everything is performed correctly, the mod will work.

Installing Fashion on Server

Installing the modogue assembly to the server is also easy, simply perform the above instruction, but we do not delete the META-INF folder. In addition, the file on the server will not be called Minecraft.jar, but Minecraft_Server.jar.

Run the Minecraft Assembly from Twitch, Looner Curse on Pirates. In this way, you can play pirates in AGRARIAN SKIES 2, Infinity Evolved. Expert, GT New Horizons, InfiTech and many other builds available in the launcher. If you briefly, we take the assembly of the Tvech of the launcher and throw it into the Pirate Multimatz Launcher.

If we do not have a launcher, we take it from here:

If necessary, then inside pass free registration. For login suitcase CURSE.COM or TWTICH.TV accounts

Include support for minecraft. Click on the gear, then select Minecraft on the menu.

Now we are looking for the modpak we need here:

For example, Infinity Evolved:

Now open the folder with the assembly.

Now we go beyond the pirate launcher on HackPhoenix.com, I like Multimc most of all:

Unpack it. (If you need 7z archiver, taking)

And run.

Choose the version of Java. Usually just Java works. Make sure you have exactly the x64 bit version otherwise with most builds there will be problems.

If necessary, x64 java take it here:

Create an account:

We use any nickname and any password. You do not forget the password, we will still have to enter it. Something like 123 is perfect for.

Now we create a new instance (assembly). Let her name and choose a version. The version must be specified in TVich Launcher, for example, Infinity Evolved is Minecraft 1.7.10.

We are waiting for the loading of pure minecraft.

Now install Forge. We usually need us latest version From available. In the case of IniFinity Evolved it is 1614.

Now check that minecraft and forge himself have been delivered correctly, run the assembly through offline mode. In fact, there is no difference between the PRAY and PRAY OFFLINE buttons for pirate.

If everything is done correctly, the main menu of the game will open and it will be seen in the lower left corner that Ford has been established.

Close the game.

Now open the folder with the assembly in Multimc.

We go to the Minecraft folder.

And now transfer everything from the Lunchet Twitch folder to the Multimatz Launcher folder with a replacement.

Usually for builds enough folders: mods, config, scripts, but if you are not sure, it is better to transfer everything, then exactly the problems will not arise.

Now we highlight more memory to java so that the assembly does not slow down. To do this, open the assembly settings.

And configure the number of memory. Ideally give the assembly of 4GB of memory, if you have 8GB on your computer and more. More than 4GB allocate undesirable, the exception is heavy textural and explicit lags of the game at 4GB. The more memory allocated, the slower on the fact of Java works.

If necessary - correct the screen resolution at startup. Indicate the sizes in pixels or put a tick so that the game is immediately on the entire screen.

And now you finally launch the game through Play Offline.

If everything is done correctly, the assembly will be loaded much longer than when the first check.

Here in general, everything. Infinity Evolved launched through a pirate launcher. Similarly, you can start Agrarian Skies, InfiTech, GT New Horizons and any other build from the Twitch (Curse) of the launcher.