Dead by Daylight: problems, launch errors, bugs, departures. Dead by Daylight is not installed, it does not start, crashes, hangs Dead by Daylight does not start a pirate

For some reason, the Windows Driver Signature Enforcement driver (DSE) is disabled in the system and therefore stinking Dead by Daylight.

After starting the game in Steam, an error occurs:

"Launch Error:
Easyanticheat Cannot Run If Driver Signature Enfotcement Has Been Disabled. "

To fix it, follow these steps in the command prompt (you can find through windows search Upon request CMD), using the administrator rights, enter two commands there (below), after which restart the computer to change the changes to take effect:

bCDEDIT.EXE -SET Testsigning Off
BCDEDITIT.EXE -SET NointegrityChecks Off

Error: the game does not start or gives black screen

Run the system check

If you are encountered with departures, errors and collaps, then check your system and make sure it is properly.

Reinstall and restart VcRedist and DirectX

Be sure to delete all versions of Microsoft Visual C ++. After that, restart your system and download them from the official Microsoft website.

Reinstall DirectX. Run the file located at:

Run \\ Steam \\ Steamapps \\ COMMON \\ DEAD by Deadlight \\ _CommonRedist \\ DirectX \\ jun2010 \\ dxsetup.exe.
Restart your computer. This is not a mandatory requirement. But if you do not reboot the computer after reinstalling the VCREDIST, then this can all end with a catastrophic failure. And even if you have DirectX, click on the re-install.

Run Dead by Daylight in compatibility mode

You can try to start the game in compatibility mode:

  • Go to the \\ Steam \\ Steamapps \\ COMMON \\ DEAD by Deadlight folder.
  • Right-click on the DeadByDeadLight.exe file.
  • Click the Compatibility tab.
  • Put a tick on "Run the program in compatibility mode with".
  • Select the Windows 8/7 / Vista / XP parameter.
  • Try older versions of Windows.

Disconnect Steam Overlay

Go to the "library". Right-click, select "Dead by Daylight Properties". Uncheck the checkbox from "Enable Steam Overlay when you are in the game."

Update Drivers Your Video Card

Depending on which technology is made by the video card, go to the official developer website and find the new NVIDIA or AMD drivers. Due to the old drivers of the game Dead by Daylight may not start.

If you have a NVIDIA GeForce video card, you can download a special program GeForce Experience.which simplifies the process of updating the drivers. Drivers for NVIDIA swing directly from the official site.

For AMD video cards, you need to download the AMD Catalyst Control Center utility.

For owners of laptops

Download the NVIDIA Control Panel or AMD Catalyst Control Center, or AMD Catalyst Control Center, depending on your card to make the game use your built-in GPU instead of one Intel.

Check the integrity of the game cache

If you have any problems, then you may have some files damaged. Repeated stam download Will help you restore them.

Also can help such an action:

  • Go to the "Stam Library".
  • Right-click the properties of DEAD by Daylight.
  • Navigate the Local Files.
  • Click on the phrase "Check the integrity of the game cache".

Open ports for Steam

To improve the creation of matches, try opening ports for Steam.

Customer Steam

  • UDP 27000 to 27015 inclusive (playing client traffic).
  • UDP 27015 to 27030 inclusive (normal matches and HLTV).
  • TCP 27014 to 27050 inclusive (STEAM loading).
  • UDP 27031 and 27036 (incoming, for domestic striming).
  • TCP 27036 and 27037 (incoming, for domestic striming).
  • UDP 4380.

SteamWorks P2P Networking and Steam Voice Chat

  • UDP 3478 (OutBound).
  • UDP 4379 (OutBound).
  • UDP 4380 (OutBound).

If the game gives a black screen, check again

1. Most often, the problem with the black screen is a problem with a graphics processor. Check if your video card satisfies minimum requirements And put the latest version of drivers. Sometimes the black screen is a consequence of insufficient CPU performance.

If everything is fine with iron, and it satisfies the minimum requirements - try switching to another window (Alt + Tab), and then return to the game window.

2. Run the game in the window, and if the game starts, transfer it to the full screen mode by pressing Ctrl + Enter (however, it does not work with all the games). Window mode You can also include in the game settings files or speaking in the launch parameters parameter -W, but it also does not work in all games.

3. Run the game on behalf of the administrator or in compatibility mode. And if it did not help you, try running the game simultaneously with the compatibility mode and in the window mode.

4. Disconnect the 2nd video card if there is

5. Remove only reading from all game files. Click the PCM on the game folder and select Properties

Errors with DirectX 11

The game will require the availability of a video card compatible with DirectX 11. This means that you must have a NVIDIA GTX400 / AMD HD5000 series video card or higher. If your video card is below the voiced series, then it does not support DirectX 11. If you play a laptop, make sure that one complies with these requirements.

Crash game

In fact, everything is easy enough. Let's proceed:

1. Check the game cache, for this you need to go to the "Properties" of the game, and click "Check the Kesh game." We wait for the end of the check if the system writes you, something like this: "* The file has not passed the check and will be installed on your computer," it means, a failure occurred, or the game was incorrectly installed, and the system will automatically set the missing files to your computer. After this operation, I advise you to restart the computer, but if you are impatient, you can try to immediately start the game.

2. The second way is simple enough if you switched to it, it is logical that the first one did not help you. Let's start.

  • We go to the "Properties" of the game, go to "Local Files" and click "View Local Files", PIDIDE, you must be in the "Dead by Daylight" folder.
  • Go to Steam, delete the game.
  • After removing the game from the Steam, delete the "Dead by Daylight" folder and reboot the computer.
  • After rebooting your top PC, we go in Steam and install "Dead by Daylight".
  • After installation, just in case, check the "cache of the game", if there are no errors in the Keshe, you can safely run the game.

Important! PC reboot must necessarily, otherwise nothing will work. Pleasant game 🙂

EAC client can not be instantiated

First method

We go to "My Computer", go to the "C" disk and type the "Easy" command. Computer You will find two files that we need to delete. These two files are "Easyanticheat.sys" and "Easyanticheat" - remove them. It may be that the "SYS" file will be used somewhere if such an error occurred, go to the "Task Manager" remove all tasks associated with DEAD by Daylight, if it does not help, restart the computer, and after rebooting, immediately go to the conductor And delete those two files. (If you did not start DBD per day, then the error should not be displayed). After the entire operation, reboot the computer again.

Second way

If the first way helped you, try checking the cache of the game, if it does not help, reinstall the game with a reboot of the computer.

Important! When you delete the game from Steam, do not forget to delete the folder with the game, otherwise all settings are saved until the next download.

Match Creating Problems

If you are waiting for a long time when the game starts, then do the following:

Go to Steam - Settings - Downloads - Download Region (Steam Settings - Downloads - Loading the region).
Choose the region in which most users. This is North America or Europe.

How it works?

The matching algorithm in Steam uses the "Download Region" parameter as initial when searching for gamers over the network. If you are specified by the Antarctic region, then it is its Steam to use first. Only when the algorithm finally make sure that at the moment all penguins in Antarctica are resting, it will turn to the search for users in other regions.

If there are not so many users in your particular region, then all this can delay for a long time.

Of course, in North America many users. But you do not forget about time zones. If in Los Angeles or New York is currently 1-5 nights (in the morning), then do not expect that the game will quickly boot.

Experiment with different regions. Choose even those that are far from you.

Why does not progress in DEAD by Daylight?

Currently, the problem with preserving the game is still relevant. Make sure your name in Steam does not contain Russian-letter values. If in the name specified in Steam's profile, there are other characters, such as TM (trademark, two letters in a circle), then definitely delete them. Just in case you can get rid of the numbers in login. Latin letters are acceptable.

After that, the problem can be solved, but there is no 100% guarantee. Developers about this issue know!

Dead by Daylight does not start

Many of the launching problems happen because of the incorrect installation. Check if there were no errors during installation, try removing the game and start the installer again, after turning off the antivirus - the files often need to work for the game are deleted. It is also important to remember that on the way to the folder with installed playing There should be no signs of Cyrillic - use for the names of the directories only the letters of the latice and numbers.

It does not prevent Check if there is enough space on the HDD to install. You can try to start the game on behalf of the administrator in compatibility mode with different versions of Windows.

Dead by Daylight brakes, low fps, lags, friezes, game freezes

1. First - install the latest drivers on the video card, from this FPS in the game can significantly climb. Also check the computer load in the Task Manager (opens by pressing Ctrl + Shift + Escape). If you see before running the game, that some kind of process consumes too much resources - turn off its program or simply complete this process from the task manager.
Next, go to the graphics settings in the game. First of all, turn off the smoothing and try to reduce the settings that are responsible for post-processing. Many of them consume many resources and their disconnection will significantly increase productivity, not strongly affecting the quality of the picture.

2. If you are in the game, then you need to get out of it. Next, after you came out. You could go to the control panel\u003e folder panel\u003e View, leaf to the bottom and put a tick against "Show hidden files, folders and discs, click OK. Next, you need to go through this path C: \\ Users \\ Username \\ APPDATA \\ Local \\ DeadByDaylight \\ Saved \\ Config \\ WindowsNoEditor (or register in the search for% APPDATA%) and go through this path\u003e \\ appdata \\ Local \\ DeadByDaylight \\ Saved \\ Config \\ WindowsNoEditor Here you will watch the file in format.ini - "gameusersettings" with which we will deal with.

We change the parameters in the config.
Open this file using a notepad and looking for these parameters:

sG.ResolutionQuality \u003d 90.
SG.ViewDistanceQuality \u003d 0.
SG.AntialiaSingQuality \u003d 0.
SG.ShadowQuality \u003d 0.
SG.PostProcessQuality \u003d 0.
SG.TextureQuality \u003d 0.
SG.EFFECTSQUALITY \u003d 0.
ScreenscaleForWindowedMode \u003d 100.
ScalabilityLevel \u003d 0.
AUTOADJUST \u003d FALSE.
ScreenResolution \u003d 100.
FullScreen \u003d True.
MainVOLUME \u003d 100.
UseHeadphones \u003d True.
MUTEMUSIC \u003d FALSE.
MuTeonFocusLost \u003d True.
Inverty \u003d false
Language \u003d Ru
PreviousAppBuildID \u003d 1290671
Busevsync \u003d false
ResolutionsIZex \u003d 1024.
ResolutionsIzey \u003d 768.
LastUserConfirmedResolutionsIZex \u003d 0.
LastUserConfirmedResolutionsIzey \u003d 0.
Windowposx \u003d 1.
Windowposy \u003d 1.
busedesktopreSolutionForFullScreen \u003d false
FullScreenMode \u003d 1.
LastConfirmedFullScreenMode \u003d 0.

After these actions, we save the file and put in its properties tick " Only reading»

Dead by Daylight flies on the desktop

If DEAD by Daylight, you often crashes onto a working slot, try to start solving the problem with reducing the quality of graphics. It is possible that your computer simply lacks performance and the game cannot work correctly. It is also worth checking the updates - most modern games Have a system automatic installation New patches. Check if this option is turned off in the settings.

Dead by Daylight is not installed, the installation hung

First of all, check if you have enough HDD to install. Remember that the installation program is required to work correctly, the stated space is required, plus 1-2 gigabytes of free space on the system disk. In general, remember the rule - at a system disk should always be at least 2 gigabytes of free space for temporary files. Otherwise, both games and programs can not work correctly or altogether refuse to start.
Installation problems may also occur due to lack of an Internet connection or unstable operation. Also, do not forget to pause the operation of the antivirus during the installation time of the game - sometimes it interferes with the correct copying of the files or deletes them by mistake, counting with viruses.

In DEAD by Daylight does not work.

Sometimes control in the game does not work due to the simultaneous connection of multiple input devices. Try turning off the gamepad or, if for some reason you have two keyboards or mouse, leave only one pair of devices. If the gamepad does not work for you, remember - officially support only controllers defined as Xbox joysticks. If your controller is determined differently - try using programs that emulate Xbox joysticks (for example, X360CE).

Sound does not work in Dead by Daylight

Check if the sound works in other programs. After that, check whether the sound is not turned off in the settings of the game itself and whether the sound reproduction device is selected to which your speakers or headset are connected. Next, during the operation of the game, open the mixer and check if the sound is turned off there.
If you use an external audio card - check for new drivers on the manufacturer's website.

If you encountered the fact that Dead by Daylight slows down, crashes, die by daylight does not start, die by daylight is not installed, control does not work, no sound, no sound, pop out errors, do not work in DEAD by Daylight - We offer you The most common ways to solve these problems.

First - check whether the characteristics of your PC meet the minimum system requirements:

  • OS: 64-bit (Windows 7, Windows 8 and Windows 8.1)
  • Processor: Intel Core i3-4170 or AMD FX-8120
  • Memory: 8 GB
  • Video: GeForce GTX 460 1 GB or AMD HD 6850 1 GB
  • DirectX 11.
  • HDD: 15 GB of free space

Be sure to update the video card drivers and the other

Before remembering the most bad words and express them towards developers, do not forget to go to the official website of the manufacturer of your video card and download the latest drivers. Often, specially optimized drivers are being prepared for the release of games. You can also try to set a later version of the drivers if the problem is not solved by installing the current version.

It is important to remember that only the final versions of video cards should be downloaded - try not to use beta, as they can have a large number of not found and not corrected errors.

Do not forget that the stable operation of the games often requires installation latest version DirectX, which can always be downloaded from the official site Microsoft.

Dead by Daylight does not start

Many of the launching problems happen because of the incorrect installation. Check if there were no errors during installation, try removing the game and start the installer again, after turning off the antivirus - the files often need to work for the game are deleted. It is also important to remember that on the way to the folder with the installed game there should be no signs of Cyrillic - use for the names of the directories only the letters of the latice and numbers.

It does not prevent Check if there is enough space on the HDD to install. You can try to start the game on behalf of the administrator in compatibility mode with different versions of Windows.

Dead by Daylight brakes. Low FPS. Lags. Friezes. Freezes

The first is to install fresh drivers on the video card, from this FPS in the game can significantly climb. Also check the computer load in the Task Manager (opens by pressing Ctrl + Shift + Escape). If you see before running the game, that some kind of process consumes too much resources - turn off its program or simply complete this process from the task manager.

Next, go to the graphics settings in the game. First of all, turn off the smoothing and try to reduce the settings that are responsible for post-processing. Many of them consume many resources and their disconnection will significantly increase productivity, not strongly affecting the quality of the picture.

Dead by Daylight flies on the desktop

If DEAD by Daylight, you often crashes onto a working slot, try to start solving the problem with reducing the quality of graphics. It is possible that your computer simply lacks performance and the game cannot work correctly. It is also worth checking the updates - most modern games have a system of automatic installation of new patches. Check if this option is turned off in the settings.

Black Screen in Dead By Daylight

Most often, the problem with the black screen is a problem with a graphics processor. Check if your video card meets the minimum requirements and put the latest version of the drivers. Sometimes the black screen is a consequence of insufficient CPU performance.

If everything is fine with iron, and it satisfies the minimum requirements - try switching to another window (Alt + Tab), and then return to the game window.

Dead by Daylight is not installed. Hung up installation

First of all, check if you have enough HDD to install. Remember that the installation program is required to work correctly, the stated space is required, plus 1-2 gigabytes of free space on the system disk. In general, remember the rule - at a system disk should always be at least 2 gigabytes of free space for temporary files. Otherwise, both games and programs can not work correctly or altogether refuse to start.

Installation problems may also occur due to lack of an Internet connection or unstable operation. Also, do not forget to pause the operation of the antivirus during the installation time of the game - sometimes it interferes with the correct copying of the files or deletes them by mistake, counting with viruses.

In DEAD by Daylight do not work saving

By analogy with the past solution, check the availability of an HDD space - both on where the game is installed and on the system disk. Often saving files are stored in the document folder, which is located separately from the game itself.

In DEAD by Daylight does not work.

Sometimes control in the game does not work due to the simultaneous connection of multiple input devices. Try turning off the gamepad or, if for some reason you have two keyboards or mouse, leave only one pair of devices. If the gamepad does not work for you, remember - officially support only controllers defined as Xbox joysticks. If your controller is determined differently - try using programs that emulate Xbox joysticks (for example, X360CE).

Sound does not work in Dead by Daylight

Check if the sound works in other programs. After that, check whether the sound is not turned off in the settings of the game itself and whether the sound reproduction device is selected to which your speakers or headset are connected. Next, during the operation of the game, open the mixer and check if the sound is turned off there.

If you use an external audio card - check for new drivers on the manufacturer's website.

Game lovers Dead by Daylight. Sooner or later faced various problems. Among the most often emerging problems when DEAD by Daylight is not installed, it does not start, or hangs, slows down, or a black screen appears, as well as during the game other problems arise, in particular, DEAD by Daylight does not save, control does not work or missing Sound in the game, in this article we will consider in detail the main causes of problems and errors, as well as ways to eliminate them.

Dead by Daylight is not installed

System Requirements Dead By Daylight

Before installing Dead by Daylight on a computer, check system requirementspresented by developers of the game. Remember that for the correct operation of the game it is necessary to comply with at least minimum requirements. However, in some cases, even minimum settings may not be enough. In this case, it is necessary to abandon the game, or increase the performance of your computer.

Minimum Recommended
OS: Windows 7/8 64-bit Dead by Daylight.
CPU: Intel Core i3-4170
AMD FX-8120
Intel Core i3-4170
AMD FX-8300
Video card:

nVIDIA GeForce GTX 460
AMD Radeon HD 6850

nVIDIA GeForce GTX 760
AMD Radeon HD 8800

RAM: 8 GB. 8 GB.
Free disk place: 15 GB. 15 GB.
Download DirectX

Of course, we will not throw out the game, but we will work on the preliminary settings. In this regard, we check our PC for compliance with the most simplest requirements. So, if Dead by Daylight is not installedLet's see if there is enough free space on the hard disk to install the game. The distribution requires the availability of free space on the disk, so several gigabytes do not interfere. Also, it should be borne in mind that various games require a significant amount of free space, up to 100 GB and higher.

Dead by Daylight installation is blocked by antivirus program

Often, antivirus programs, in combating viruses, protecting our computer from the effects of external threats, block numerous processes performed for security purposes. Sometimes such safety is so strong that it starts to close access not only to viruses, but also suspends some normal processes, perhaps by mistake, considering them potentially vulnerable. Hence the conclusion: disconnect the antivirus at the installation time of DEAD by Daylight.

Computer Cleaning and Reboot

Sometimes, a simple reboot of the system can solve many problems arising both when installing games and their subsequent work. The same applies to various programs, applications. The reasons as already mentioned, the set: The computer is scored by various kinds of garbage, among which the system cache overflow, the maximum permissible number of simultaneously running processes, among which, perhaps some depended and are not performed, but the load on the system is not quite bad. In this case, .

Internet access

Some game clients During the installation, you need access to the Internet, ensuring access to the installation server or updates. In this case, it is necessary make sure the internet.

Dead by Daylight does not start

Before looking for reason why Dead by Daylight does not start, It is necessary to make sure that the installation itself has passed successfully. Otherwise, if during the installation process to the computer, there were any failures or errors, but at the same time the game was established, though, with maximum accuracy, it is impossible to ensure the next start and performance of the game. If the game starts lucky. However, what will happen next is unknown.

Reinstalling games

Surely, many gamers came across a situation or, to be called, the cause, consequence related to reinstalling the game. That is, if the game was established normally, but it does not want to start, repeated installation can correct the problem. With which it is connected, it is unknown, perhaps an antivirus or firewall at the time of installation "ate" some files either something else, but installing the game again, it becomes quite efficient. In this way, remove the game and install it again.Hooking attention to each installation details. Perhaps at some point the installation program will request any files, etc.

Search for information on the text of the error

Another option, it is not described in this article, but as such a small secret, which everyone knows, add that an error when starting Dead By Daylight is usually accompanied by a corresponding system message. So, in this case, it would be true set the text of this errorAs a result, you will get the most detailed response, and, moreover, concerning this particular error. That is the way you definitely determine the reason and, as a result, will find a solution.

Computer news, reviews, solving problems with a computer, computer games, drivers and devices and other computer programs. "Title \u003d" (! lang: programs, drivers, problems with a computer, games" target="_blank">!}

Launch Dead by Daylight on behalf of the administrator

Alternatively, you can use the launch of the game on behalf of the administrator. That is, in our case, to run Dead by Daylight on behalf of the administrator, you must click on the right mouse on the game label and select Run on the name of the administrator. If this method helps to solve the problem so that the error subsequently does not occur, set the start on behalf of the default administrator For this game. To do this, open the shortcut properties, select the Checkbox in the Compatibility tab. Execute this program on behalf of the administrator.

Game compatibility problem

Another obstacle to launch DEAD by Daylight can serve as a game incompatibility with your operating system. In this case, everything is there in the same place, in the properties of the shortcut, you must add a check box Run the program in compatibility mode with:, and in the drop-down list, select the desired OS.

Availability of libraries.NET Framework

Also, a completely serious problem of launching DEAD by Daylight is the lack of an installed .NET Framework library on a computer, which provides launch and maintains the performance of almost all programs and applications, including games. This is a prerequisite and Microsoft .NET Framework must be installed. At the same time, it should be borne in mind that there are various versions of the Library .NET Framework, and therefore, any one of them can not sufficiently guarantee the right job of the game.

Availability DirectX

And, of course, perhaps the most important condition, the requirement that needs absolutely for all games, including DEAD by Daylight installed by DirectX. Without it, no game will work. Currently, almost all distributions that somehow require the presence of the installed DirectX, already have this set in their composition. As a rule, DirectX is automatically installed with the game. However, if it is missing, it must be downloaded and installed. Do it optional before installing the game, it is possible after installation, but the availability of DirectX on the computer is simply necessary.

Dead by Daylight freezes

Problem with video card in DEAD by Daylight

The reason for the hang of many computer games, including DEAD by Daylight, is a video card, inconsistency with its minimum requirements. For gamers, the video card is the main means, the main success or disappointment. If yours the video card is weak, then no updates, no drivers and the like you will help you. To achieve maximum effect and enjoy the game reasonable tool would think about acquiring a more modern, stronger video card. There may be significant financial investments in the disadvantage of this method, as high-quality graphics and the game on the maximum settings - the pleasure is not cheap, and the purchase of a good video card can pour out in a round sum.

Installation and Updating Video Card Driver

But do not despair. To make the game more or less well on the computer, you can solve the problem even with a conventional medium video card, you can configure it, and also check all the necessary computer parameters to provide comfortable game. If your video card is more or less modern, in this case mandatory condition is the presence of the most recent drivers. Fortunately, download and install them can be completely free from the official website of the manufacturer. After installing the drivers, as a rule, if you have an AMD or NVIDIA video card, the special software is loaded with them, which is installed on the computer, and thanks to which, you can manage various game settings.

Dead by Daylight brakes

Let's go back to the problems described above, so to speak, with poor quality installation. If at the same time there were some problems, it is possible that the game will continue to often cause braking, lags and other errors.

Dead by Daylight slows down due to unnecessary processes

If the game Dead by Daylight brakesYou can also check the operation of the operating system. By itself, any game requires significant resources to play and correct work. Dead by Daylight is no exception. If at the moment, in addition to the game, other processes are performed, it is necessary to check them and determine how important they are at the moment. As a quick solution close all unnecessary processes and leave only the most necessary necessary. Here the main thing is not to overdo it, otherwise you can plan everything in the world so that the computer itself will just get up.

Computer news, reviews, solving problems with computer, computer games, drivers and devices and other computer programs. "Title \u003d" (! Lang: programs, drivers, computer problems, games" target="_blank">Компьютерная помощь, драйверы, программы, игры!}

Dead by Daylight brakes due to weak Internet

Another point is access to the Internet. If the game requires a good high-speed Internet, then, of course, the problem is obvious and, in principle, is understandable. And for this it is worth thinking about the acquisition of a more powerful tariff. But there are situations when even with good Internet, Dead by Daylight slows down. For example, in certain moment It began to update any application on a computer, for example, antivirus, already not to mention if moving movies along with the game. And perhaps you searched video, for example, passing Dead. By Daylight.And at the same time playing the game!? Thus, everything is anything to slow down here. Decide something one thing: either a movie or a game. And if you need both, at least, the computer must have "Thermonuclear" properties. Do you understand what we are !?

Dead by Daylight How to raise FPS

Setting up graphics in Dead by Daylight

High FPS or FPS is something that is so often lacking in the game. If you enter the number of users, in this case, the use of maxima graphic settings can strongly affect the FPS games and claricize various lags, braking, freezes. On the other hand, if you reduce the graphics settings as much as possible, you can significantly increase FPS. By the way, you can manage graphics settings not only in the game itself, but also in software Your video card.

Tools of overclocking video card

To significantly enhance FPS Dead By Daylight Many users use tools for overclocking. The network is very much and finding much difficulty. For example, to overclock the NVIDIA video card, you can use the MSI AfterBurner utility.

Low FPS due to overheating

Low FPS in the game Dead by Daylight maybe as because of overheating of the central processorand the video card itself. The above-mentioned means are capable of eliminating this problem, thanks to which you can, for example, set the cooler speed to the maximum.

Dead by Daylight Black Screen

If it happened so that Dead by Daylight issues black screen, there is a problem, again, with a video card. Check the availability of drivers, namely, matching their newest. If the manufacturer has released more new version, do not be lazy to spend time - update the video card driver.

Dead by Daylight crashes

If the game Dead by Daylight flies on the desktopIn this case, it is worth checking the correctness of the installation both the game itself and updates, patches, etc. maybe previous update In itself contains certain errors. There is already little here, which depends on the gamer, all the questions to the game developers. If it is possible to reinstall the updates received, do it. In the worst case - reinstalling the game itself.

Dead by Daylight is not saved

Probably the most common reason why Dead by Daylight is not saved, is an incorrect path to save the game. What does it mean? And it means only one thing - many games refuse to work with Cyrillic. If the folder on your computer is saved in your way, Cyrillic signs in your way, then perhaps die by daylight will issue an error while saving. Simply put, use the path to the folder to save Dead by Daylight, only on Latin, without Russian words.

Most problems S. conservation Dead. By Daylight arises due to the incompatibility of the game with the operating system. most inherent this fact operating system Windows 7, but maybe others.

Dead by Daylight does not work.

Problem with keyboard or joystick

If in Dead by Daylight does not work., There are many reasons. For example, if the control buttons do not react at all, it may have been malfunction with the controller or keyboard. Check the connection reliability and, if necessary, restart the device. Sometimes, to complete this procedure requires a reboot game.

Shipping keys in the game

Often the problem with DEAD By Daylight control can occur due to keypads. When several buttons are clamped at the same time, the system reacts peculiar to it. What conclusion from here can be done? - Use the joystick to play.

Incorrect control settings

At the same time, the control problem can be confirable control Dead. By Daylight. Carefully check the control keys and, if necessary, replace the you need.

Invalid keyboard layout

Alternatively, you can change keyboard layout. Make it can be a combination of keys Schift + Alt.. The fact is that management in some games for some reason works only on English layout or vice versa. Experiment.

Dead by Daylight No Sound

Setting the volume parameters

There is such interesting moment: If at all, it is clear, but there are situations when the sound on the computer works, and, let's say, there is no sound in any application, for example in a browser or game, there is no sound. The fact is that in the settings sound card The corresponding parameters are not installed. Simply put, if in Dead by Daylight No Sound, it is necessary open Volume Settings and check all available settings., special attention, at the same time, by paying our game.

Sound setting in Dead by Daylight

If there is no such application in the volume parameters, but the sound in DEAD by Daylight is still missing, go to the settings of the game itself. Most likely, the main audio device is disabled somewhere or changed. And further. Very often, and there is practically everyone - sound settings of the game or playback devices are not defined. In order to solve the problem, restart the game, and if there is a desire and some time, for greater confidence, restart the system. In many cases, this method helps.

This is a little from what can be done is to pay attention to when there is problems with DEAD by Daylight. Perhaps something is inadequate, something is said not so. If you have questions about the game, please ask them in the comments. Or, if you have already encountered various kinds of problems, they could decide them, share, please. Perhaps someone has a similar problem right now, and your decision will help to correct the situation. Good luck to you and good game!