Mod battle assistant how to install from the archive. How to install the BATTLE ASSISTANT modification

Maud Battle Assistant for World of Tanks 1.4.1 was originally developed for participation in the competition best modifications for Game. As a result, Battle Assistant won this competition, and the players received very useful mod, which gives a lot of different additions and innovations to the game.


Battle Assistant is divided into three parts for each vehicle variant, the most widely used and very useful addition for those players who prefer to play art - this is or an improved sight for artillery.

The sight aiming type on the SPG will completely change, now the sight will be clearer for you and similar to that on other vehicle variants. With this sight, it will now be possible to very accurately target an enemy tank or a specific place on the tank. To enable a new sight mode, press the key "G" .

In the sight settings, you can set any key with which it will be convenient for you to turn on the sight.

Benefits of self-propelled guns for a healthy person

  1. Very clear trajectory of the projectile
  2. Convenient on city maps, where you will clearly see the target's range of fire
  3. Can target any point on the tank
  4. If the enemy leaves the spotlight, the aiming point will remain in the same place and you can close down and shoot

Helpful expert

The useless Expert perk will slightly improve.

Now the Expert turns on after a few seconds for the enemy to whom you have inflicted damage, or who have marked with the command "Support with fire".

The Expert perk must be learned from the commander, and the enemy tank must be within your radius of detection.
The mod only works with the expert perk enabled.

Spotting fire

If the enemy disappears from the light, on a hill against the background of the sky, a shot at the aiming point will fly much higher than the possible location of the enemy. This happens because the aiming marker is displaced from the initial point by about half a centimeter upward, and the sight has to be lowered from memory. Accurately aiming in this case is still quite difficult and requires certain skills and experience.
With installed Spotting fire The mod will automatically adjust the sight in sniper mode against the background of the sky, so that in cases of an unexpected exit from behind the light, the shot will go a little lower and then it will reach the target.

The file res_mods \ 0.9.20.0 \ scripts \ client \ mods contains the battle_assistant.txt file, you can make various settings or turn off some version of the mod.

The Battle Assistant mod causes apprehension among many players, due to the fact that it gives a great advantage in battle and many think that you can get a ban for using it.

The healthy person's self-propelled gun mod is fully authorized by the developers and you can safely install it.

Updates:

09.06.2016:

  • updated for 0.9.15;
  • fixed minor bugs;

10.03.2016:

Updated for 0.9.14

14.12.2015:

  • the mod is tested for operability by the author himself and but 100% works on version 0.9.17 (if it does not work, look for a conflict with other mods);

01.09.2015 up to version 1.3.2:

  • adapted for 0.9.10;
  • fixed bugs;
  • updated scripts;

Installing Battle Assistant

copy the mods folder to the game folder.

Does not work mod Battle Assistant, what to do?

If you are sure that everything was installed correctly, but the mod still does not want to work, check the name of the folder in which your game is located and if it is in Russian, rename it to English and everything will work. Proven solutions.

How can I change the power button of the sight from G to some other?

At the first launch, the mod_battle_assistant.txt file with settings will appear in the mods / configs / battle_assistant folder.
You can change the control button in the WOT / res_mods / 1.x.x.x / scripts / client / gui / mods / mod_battle_assistant.json file
Controlled by button G

IMPORTANT! Now the mod needs to be activated every 7 days on this page, otherwise it will not work. After activation, restart the game.

Download

↓ Expand

  • the mod is sewn into the game;
  • there are alternatives from Ekspoint and reven86
The mod is now available in the game by default. Press the "G" button to activate the mod. But if the standard version does not suit you, try ours.

Download mod World of Tanks Battle Assistant for free without registration is an excellent mod for art that allows you to hit vehicles behind obstacles. This official sight (called the "healthy person's sight") is intended for SPGs and is not used on other vehicles.

Description

The Battle Assistant artillery sight makes it possible to see the place of the projectile hit as in a sniper scope. It does not replace the main sight, but complements it. When you press the "J" key while aiming (in the Russian layout "O"), the view appears sniper scope... In this case, the camera is located on the side of the approach of the projectile. See for yourself:

More screenshots:

With the help of the mod, you can easily hit the enemy's equipment in places behind vertical obstacles with holes (bridges, windows of houses). It is enough to find the enemy on the map, aim at him behind the obstacle, turn on the sight for the art battle assistant and wait for him to appear in the window of the house, go under the bridge and other places. Since it does not replace the standard ballistic sight, it is possible to use them together. This is a handy addition for gunners.

In addition, the Battle Assistant mod is convenient when aiming at the enemy at close distances, especially when he is hiding behind cover and periodically looks out or moves in fast mode. Standard sight in this regard, it is not convenient, there is no possibility of approaching when firing with direct fire.

How to use


When firing from an SPG with the left Alt key pressed, the camera is attached to the projectile. Makes the useless Expert perk slightly more useful. Now the Expert is activated after 3-4 seconds for the tank, which you have inflicted damage, or which has been marked with the command “Support with fire”. The Expert perk must be pumped by the commander, and the enemy tank must be in the zone of its own light. Settings in the file mods / configs / battle_assistant / mod_battle_assistant.txt The mod must be activated at https://wotinspector.com/battleassistant The link will be available in the hangar in the notification center. Added modification settings in the hangar. For the settings to appear in the hangar, you need to additionally install wotmod from here https://bitbucket.org/P0LIR0ID/wot-modslist/downloads/ (the most latest version). Usually it is already installed if any modpacks or other mods with settings in the hangar were installed. If the file does not exist, the settings can still be edited manually.

Description:

It is not often possible to find a mod that won in some kind of competition and which was approved by the developers themselves. The Battle Assistant mod - the self-propelled gun of a healthy person is just that. Most recently, it won a modification competition run by WG itself. Its author won a lot of money, but it's worth it. After all, the mod has many useful and interesting opportunities to help you in everyday battles. It is divided into modules for each vehicle type. The most famous module of the mod is the improved sight for artillery, which will really give you an advantage when playing with artillery.

The self-propelled gun sight of a healthy person:

This module became the first improvement that the mod introduced into the game and it was he who interested the members of the jury of the competition. The main reason for this attention was that the mod changed the look of the standard art sight and made it more like a sniper, thus allowing the artificer to more correctly estimate the trajectory of the projectile's flight and even aim at the lower armor plate of the tank or target it behind a stone, while causing maximum damage ...

The main advantages received by users of this mod:

  • fully understandable trajectory along which the projectile will fly
  • facilitating the game for artillery on city maps due to the presence of an improved art sight, which helps to aim at the tank even between houses
  • fixing the aiming point even if the enemy you were aiming at disappeared from the light

Below you can see the screenshots with the module's operation, there are six of them, every second demonstrates the operation of the "ACS of a healthy person" module.

Warning: No images in specified directory. Please check the directoy!

Debug: specified directory - https: //site/images/2014/9/1.4.1.2

To activate the module, turn on the art sight and click on the "J" button or on the mouse wheel.

Surprise by pressing ALT

"Useful Expert" module.

It will make the "Expert" perk more useful than it really is, making it automatic activation (within 3-4 seconds) after you fired a shot or mark enemy tank the request "Support with fire."

The module works only if one of the crew members of your tank has an "Expert" upgrade.

"Spotting fire" module.

With the help of this module, you can automatically fix your sight when the enemy disappears on a hill against the background of the sky and, when fired, shoot exactly at the point where the enemy was last detected. Without the mod, the sight would have shifted to the sky behind him and the projectile would have flown above the tank. This module is an improved version of the mod Ballistic calculator WoT - Fixing the sight over the hill 1.0. If you do not understand the benefits of this module, follow the previous link and read an example of using the mod.

The module works automatically in a sniper scope.

Battle Assistant mod does not work, what should I do?

If you are sure that everything was installed correctly, but the mod still does not want to work, check the name of the folder in which your game is located and if it is in Russian, rename it to English and everything will work. Proven solutions.

The sight sticks, the mod does not work, what should I do?

In update 0.9.19, many tankers faced the problem of sticking sight, all this happens due to the outdated game cache. To solve this problem, we added a program to clear the cache to the installer, it will do everything automatically. If you install the mod using the archive, you will have to run the ClearCache.bat file.

Installation:
Copy the mods folders to the game folder (WOT /), confirming the replacement.

At the first launch, the mod_battle_assistant.txt file with settings will appear in the mods / configs / battle_assistant folder.

IMPORTANT! Now the mod needs to be activated every 10 days on this page, otherwise it will not work. After activation, restart the game.

Activation is completely free and allows you to use the mod for the next 10 days. After that, the mod must be reactivated.

It is not often possible to find a mod that won in some kind of competition and which was approved by the developers themselves. The Battle Assistant mod - the self-propelled gun of a healthy person is just that. Most recently, it won a modification competition run by WG itself. Its author won a lot of money, but it's worth it. After all, the mod has many useful and interesting features that will help you in everyday battles. It is divided into modules for each vehicle type. The most famous module of the mod is the improved sight for artillery, which will really give you an advantage when playing with artillery.

The self-propelled gun sight of a healthy person:

This module became the first improvement that the mod introduced into the game and it was he who interested the members of the jury of the competition. The main reason for this attention was that the mod changed the look of the standard art sight and made it more like a sniper, thus allowing the artificer to more correctly estimate the trajectory of the projectile's flight and even aim at the lower armor plate of the tank or target it behind a stone, while causing maximum damage ...

The main advantages received by users of this mod:

  • fully understandable trajectory along which the projectile will fly
  • facilitating the game for artillery on city maps due to the presence of an improved art sight, which helps to aim at the tank even between houses
  • fixing the aiming point even if the enemy you were aiming at disappeared from the light

Below you can see the screenshots with the module's operation, there are six of them, every second demonstrates the operation of the "ACS of a healthy person" module.

Surprise by pressing ALT

"Useful Expert" module.

It will make the "Expert" perk more useful than it really is by making it automatic (within 3-4 seconds) after you fired or mark an enemy tank with the request "Support with fire."

The module works only if one of the crew members of your tank has an "Expert" upgrade.

"Spotting fire" module.

With the help of this module, you can automatically fix your sight when the enemy disappears on a hill against the background of the sky and, when fired, shoot exactly at the point where the enemy was last detected. Without the mod, the sight would have shifted to the sky behind him and the projectile would have flown above the tank. This module is an improved version of the mod Ballistic calculator WoT - Fixing the sight over the hill 0.9.14. If you do not understand the benefits of this module, follow the previous link and read an example of using the mod.

The module works automatically in a sniper scope.

Installation:

Copy the scripts folder to WOT / res_mods / 0.9.14 / confirming the replacement.

Battle Assistant mod does not work, what should I do?

If you are sure that everything was installed correctly, but the mod still does not want to work, check the name of the folder in which your game is located and if it is in Russian, rename it to English and everything will work. Proven solutions.

How to change the power button of the sight from J to some other?

Open WOT \ res_mods \ 0.9.14 \ scripts \ client \ gui \ mods \ mod_battle_assistant.txt with NotePad ++ and edit the keys: "" line without removing the quotes. For example, Keys.KEY_X or any other. You need to put English letters!

Battle Assistant will add to the game completely new regime aiming for art and some other possibilities.

What is the usefulness of the modification?

it alternative sight for artillery, the peculiarity of which is that the view completely changes during the art mode, that is, the standard top view is replaced with an adapted isometry and thus it is much more comfortable to fire at enemies. You can literally trace the trajectory of the projectile.

This is especially noticeable when shooting at the city, as you can see whether a projectile will fly through houses or not, in contrast to standard mode, where you have to navigate only on the changing color of the strip.

The mod works only for self-propelled guns, work in sniper mode for other types of equipment is not provided.

It was this mod that won (Wargaming Developers Contest - a developer competition from Wargaming). That's why the mod is not prohibited, and moreover, it is approved by the developers.

The main features and benefits of this version:

  • switching aiming mode ( default key G) - standard and " ACS of a healthy person";
  • zoom for art - aka zoom mod, that is, you can move the camera as far as possible from your tank and see almost the entire battlefield;
  • ignoring obstacles - the camera will not jump over obstacles in the path of the projectile (enabled by default);
  • fire spotter- have you noticed that when an enemy is hiding on a hill, the projectile flies much higher? This is due to the fact that if there is no target, the aiming point is shifted far behind the tank; in such cases, the spotter forces the projectiles to fly along a lower trajectory;
  • Expert mode- now the skill is triggered a few seconds after the damage inflicted on the enemy, also the perk is now activated after the command "support with fire".

How do I install Battle Assistant?

  1. Download the file.
  2. Run, unzip the insides.
  3. Everything inside must be copied to the folder: World_of_Tanks / mods / 1.4.0.0 /

How to use the crosshair in the game?

It doesn't take much cleverness to figure out how to enable Battle Assistant in battle. There are two modes of operation:

  1. standard,
  2. improved (mod).

You can switch between them using the key G.

How do I customize the mod?

In folder World_of_Tanks \ res_mods \ 1.4.0.0 \ scripts \ client \ gui \ mods there is a file mod_battle_assistant.txt... We need it, we open it with a regular notepad. Below is a list of parameters:

  • enabled: true / false - on, off the mod;
  • keys:"" # list of used keys, do not remove quotes! KEY_J - change to a button convenient for you if you want. For G, for example, this would be KEY_G.
  • zoomSpeed: 3.0 - zoom speed;
  • ignoreObstacles: true / false - ignore obstacles
  • expert:
    • enabled: true
  • gunner:
    • enabled: true

What to do if Battle Assistant doesn't work?

  1. Check if the installation is correct, namely:
    1. the folder where you placed the files;
    2. the version number of the folder inside res_mods, should be 1.4.0.0;
    3. the folder in which the game is located must be written in English.
  2. If you changed the settings of the mod, possibly screwed up somewhere, restore the original version.
  3. The mod is guaranteed to work on a clean client, if you collect your own mods, perhaps it conflicts with other add-ons.

For comparison, let's take a look at the before and after screenshots.