Contacts
the main/ Card

Download mod for art. How to install the BATTLE ASSISTANT modification

Battle Assistant This is a mod allowed by the developers, which is necessary for more convenient aiming for the SPG. In this article, you will learn as much as possible about this mod. You can also download the sight for the art of the battle assistant world of tanks 0 9 17 mod, I will also tell you in detail how to install it.

Benefits of the Battle Assistant Mod

Battle Assistant is a completely different sight for artillery (ACS) in World of Tanks, the peculiarity of which is that the view completely changes during the artillery mode, that is base view from above is replaced by adapted isometry and thus it is much more comfortable to fire at enemies. When aiming, you can literally count the trajectory of the projectile.

This is especially noticeable when shooting in the city or next to standing buildings, as you can see whether a projectile will fly through houses or not, unlike normal regime where you have to navigate only on the changing color of the strip

The mod works only for self-propelled guns, work in sniper mode for other types of equipment (tanks, anti-aircraft guns) is not provided.

Is the Battle Assistant mod allowed by the developers?

It was this mod that took first place in the Wargaming Developers Contest (WGDC - a developer contest from Wargaming). Therefore, the mod is not prohibited, and moreover, it is approved by the creators of the game. Therefore, you can, do not worry, you will not be banned for this.

The main features and benefits of Battle Assistant:

  • switching the aiming mode (by default, the J key) - standard and "ACS of a healthy person".
  • ignoring obstacles - the camera will not jump over obstacles in the path of the projectile (enabled by default).
  • zoom for art - aka zoom mod, that is, you can move the camera as far as possible from your tank and see almost the entire battlefield.
  • "Expert" mode - now the skill is triggered a few seconds after the damage inflicted on the enemy, and the perk is now activated after the command "support with fire".
  • spotter - have you noticed that when an enemy is hiding on a hill, the projectile flies much higher? This is due to the fact that if there is no target, the aiming point is shifted far behind the tank; in such cases, the spotter forces the projectiles to fly along a lower trajectory.

Here's a simple comparison between standard aiming and aiming with the mod installed:

Where to download the Battle Assistant mod

You can download the sight for art mod battle assistant world of tanks 0 9 17 here at this link:

This mod weighs only 0.056 MB

How to install the Battle Assistant mod on World of Tanks?

  1. Download the mod.
  2. Unpack the mod.
  3. Everything that you unpacked needs to be copied to the folder: World_of_Tanks / res_mods / 0.9.17.0.3 /

This video explains in detail how to install the mod:

How to use the crosshair in the game?

It doesn't take much cleverness to figure out how to enable Battle Assistant in battle. There are two modes of operation:

  1. Standard.
  2. Improved (mod).

You can switch between them using the G key.

How to customize the Battle Assistant mod?

The mod_battle_assistant.txt file is located in the World_of_Tanks \ res_mods \ 0.9.17.0.3 \ scripts \ client \ gui \ mods folder. We need it, we open it with a regular notepad. Below is a list of parameters:

enabled: true / false - on, off the mod;

keys: "" # list of used keys, do not remove quotes! KEY_J - change to a button convenient for you if you want. For G, for example, this would be KEY_G.

zoomSpeed: 3.0 - zoom speed;

ignoreObstacles: true / false - ignore obstacles


What if the Battle Assistant mod doesn't work?

If the mod did not start working after installation, you need to check the correctness of the installation, namely:

  1. The folder where you placed the files;
  2. The version number of the folder inside res_mods should be 0.9.17.0.3;
  3. The folder containing the game must be written in English.
  4. If you changed the settings of the mod, perhaps screwed up somewhere, restore the original version.
  5. The mod is guaranteed to run on a clean client, if you build your own mods, perhaps it conflicts with other add-ons.

Description

We present to you the best art sight, which is on this moment generally exists in our game World of Tanks. This is unique mod for artillery called Battle Assistant for WOT 1.6.0.7, which has a semi-sniper, semi-artillery aiming mode. Including this mod, you can throw shells and at the same time look from the side at the enemy tank and see the real trajectory of the shell. That is, the player with his help can see for sure whether he can get into the enemy's tank or not. With him, it is easier to target the enemy behind houses, behind hills, and in general it becomes easier to understand the trajectory of a flying projectile. The scope is just perfect for precision art, where the spread is not very large (for example, for Object 261 or any French art). It helps not to hit the screens, the harp, and anywhere, namely target those places where you want to close up the projectile to the enemy. Experienced art experts highly praise and recommend this mod, they say that they used to bend it, and with it they began to bend it even better. This mod is not banned, administration World games of Tanks knows about him. Moreover, this mod took first place in the nomination " Best modification games "in a competition from the developers of Wargaming called" WGDC ​​". This is a completely legal mod for artillery. If you do not know, then the developers may introduce it into the game in the future. In any case, such conversations they have (or have) ...

To enable the Battle Assistant art sight go to artillery sight and press the "J" key or the mouse wheel.

Screenshots

What happens when you press the ALT key while firing?

Module "Useful Expert"

For his work, you need a crew member with a pumped Expert perk. As a result, the perk will be automatically triggered within a few seconds after firing or marking the enemy with the command "support with fire".

Module "Spotting fire"

This is a very cool thing. When playing with artillery, each player had cases when, when the shot button was pressed, the enemy disappeared from the light, as a result, the sight was lost and the projectile flew away where it was not necessary. With this module, you will not have such problems, because it will clearly, in automatic mode, fix the sight after the enemy disappears from the light. This will save you nerves.

Battle Assistant Mod Configuration File

World of Tanks / mods / configs / battle_assistant / mod_battle_assistant.txt

All possible settings are signed in Russian for the convenience of players.

Can I change the "J" key that activates the mod by default?

Yes. This possibility is provided. Go to the configuration file (World of Tanks / mods / configs / battle_assistant / mod_battle_assistant.txt) using the Notepad ++ editor and in line number three (keys: "") you can add any other key.

How do I turn on the commander's camera?

This can be done in the already mentioned mod settings file (World of Tanks / mods / configs / battle_assistant / mod_battle_assistant.txt). Open it with Notepad ++ and on line number eight (activateCommandersCamera: false) replace false with true.

Installation

Place the mods folder from the archive into the World of Tanks folder.

The mod needs to be activated every 7 days. Activate on the website:

  • Update date: 12 Sep 2019
  • Total marks: 27
  • Average rating: 3.96
  • Share this:
  • More reposts - more updates!

Latest update information:

Updated 09.12. Updated for World patch of tanks 1.6.0.5

Artillery, unlike historical combat vehicles, is deprived of the ability to fire direct fire over long distances. The mod for turning on the sniper aiming mode for art eliminates this injustice and makes it possible to use the World of Tanks art sau as anti-tank weapons.

The video illustrates the work well sniper scope for art.

You go into battle, for example, on the German art-sau Bison and can play both as artillery, throwing it across the entire map, and as a tank destroyer, shooting opponents with direct fire. When playing art in this mode, you need to take into account that you have a huge spread, a complete lack of armor and poor mobility.

Artillery accuracy is significantly worse than that of other vehicle classes. But, if in art mode the projectile hitting not directly on the target, but nearby can also cause damage to the enemy, then in the sniper mode the projectile will simply fly past the target. Given the long reloading time of artillery, such a mistake can be fatal.

Poor armor and mobility means you shouldn't be glowing at all. When found, the chances of leaving or getting a rebound from the armor are minimal. If you are playing in art mode and an enemy has broken through to your base light tank, then there is still a chance for his allies to destroy him before he destroys you. But if you play arte in pt-mode (sniper mode), then, most likely, your combat vehicle is in line of sight of the enemy. Unsuccessful camouflage and lightning in this case mean, usually, a volley at you from several barrels and sending to the hangar.

Customization

The configuration of the mod is in the cammod.cfg file in the scripts \ client \ mods directory. In it you can change the buttons that enable various aiming modes, as well as the free camera. The sniper scope mod for art is not a cheat, but the free camera mod in battle is

Battle Assistant will add to the game completely new regime aiming for art and some other possibilities.

What is the usefulness of the modification?

This is alternative sight for artillery, the peculiarity of which is that the view completely changes during the art mode, that is, the standard top view is replaced by an adapted isometry and thus it is much more comfortable to fire at enemies. You can literally trace the trajectory of the projectile.

This is especially noticeable when shooting around the city, as you can see whether a projectile will fly through houses or not, in contrast to standard mode where you have to navigate only on the changing color of the strip

The mod works only for self-propelled guns, work in sniper mode for other types of equipment is not provided.

It was this mod that won (Wargaming Developers Contest - a developer competition from Wargaming). therefore the mod is not prohibited, and moreover, it is approved by the developers.

The main features and benefits of this version:

  • switching aiming mode ( the default is the G key) - standard and " ACS of a healthy person";
  • zoom for art - aka zoom mod, that is, you can move the camera as far as possible from your tank and see almost the entire battlefield;
  • ignoring obstacles - the camera will not jump over obstacles in the path of the projectile (enabled by default);
  • fire spotter- have you noticed that when an enemy is hiding on a hill, the projectile flies much higher? This is due to the fact that if there is no target, the aiming point is shifted far behind the tank; in such cases, the spotter forces the projectiles to fly along a lower trajectory;
  • Expert mode- now the skill is triggered a few seconds after the damage inflicted on the enemy, also the perk is now activated after the command "support with fire".

How do I install Battle Assistant?

  1. Download the file.
  2. Run, unzip the insides.
  3. Everything inside must be copied to the folder: World_of_Tanks / mods / 1.4.0.0 /

How to use the crosshair in the game?

It doesn't take much cleverness to figure out how to enable Battle Assistant in battle. There are two modes of operation:

  1. standard,
  2. improved (mod).

You can switch between them using the key G.

How do I customize the mod?

In folder World_of_Tanks \ res_mods \ 1.4.0.0 \ scripts \ client \ gui \ mods there is a file mod_battle_assistant.txt... We need it, we open it with a regular notepad. Below is a list of parameters:

  • enabled: true / false - on, off the mod;
  • keys:"" # list of used keys, do not remove quotes! KEY_J - change to a button convenient for you if you want. For G, for example, this would be KEY_G.
  • zoomSpeed: 3.0 - zoom speed;
  • ignoreObstacles: true / false - ignore obstacles
  • expert:
    • enabled: true
  • gunner:
    • enabled: true

What to do if Battle Assistant doesn't work?

  1. Check if the installation is correct, namely:
    1. the folder where you placed the files;
    2. the version number of the folder inside res_mods, should be 1.4.0.0;
    3. the folder in which the game is located must be written in English.
  2. If you changed the settings of the mod, possibly screwed up somewhere, restore the original version.
  3. The mod is guaranteed to work on a clean client, if you collect your own mods, perhaps it conflicts with other add-ons.

For comparison, let's take a look at the before and after screenshots.

Self-propelled guns sight of a healthy person:

This sight won the official competition from Wargaming, becoming the first improvement that changed the appearance of the main sight of a tank destroyer, bringing it closer to that of a conventional tank sniper sight. stone, while causing maximum damage.

The main advantages received by users of this mod:

  • fully understandable trajectory along which the projectile will fly
  • facilitating the game for artillery on city maps due to the presence of an improved art sight, which helps to aim at the tank even between houses
  • fixing the aiming point even if the enemy you were aiming at disappeared from the light

Below you can look at the screenshots with the work of the module, there are six of them, every second demonstrates the work of the "ACS of a healthy person" module.

To activate the module, turn on the art sight and click on the "J" button or on the mouse wheel.

"Useful Expert" module.

It will make the "Expert" perk more useful than it really is, making it automatic activation (within 3-4 seconds) after you fired a shot or mark enemy tank the request "Support with fire."

The module works only if one of the crew members of your tank has an "Expert" upgrade.

"Spotting fire" module.

The module automatically fixes your sight in the place where the disappeared enemy shone. And having shot, you will get exactly where you were aiming, and not into the shifted sight.

Installation:

Copy the scripts folder to WOT / res_mods / 1.5.0.0 / confirming the replacement.

Does not work mod Battle Assistant, what to do?

If you are sure that everything was installed correctly, but the mod still does not want to work, check the name of the folder in which your game is located and if it is in Russian, rename it to English and everything will work. Proven solutions.

How to change the power button of the sight from J to some other?

Open WOT \ res_mods \ 1.5.0.0 \ scripts \ client \ gui \ mods \ mod_battle_assistant.txt with NotePad ++ and edit the keys: "" line without removing the quotes. For example, Keys.KEY_X or any other. You need to put English letters!

The sight sticks, the mod does not work, what should I do?

In update 1.4.0.1, many tankers faced the problem of sticking sight, all this happens due to the outdated game cache. To solve this problem, we added a program to clear the cache to the installer, it will do everything automatically. If you install the mod using the archive, you will have to run the ClearCache.bat file.

How do I turn on the commander's camera?

Open WOT \ res_mods \ 1.4.0.1 \ scripts \ client \ gui \ mods \ mod_battle_assistant.txt with NotePad ++ and edit the line activateCommandersCamera: false, replace false with true. Save changes and reload the game.