Contacts
the main/ Fitness

Wot download mod for art battle assistant. Where to download the Battle Assistant mod

Battle Assistant will add to the game completely new regime aiming for art and some other possibilities.

What is the usefulness of the modification?

This is alternative sight for artillery, the peculiarity of which is that the view completely changes during the art mode, that is, the standard top view is replaced by an adapted isometry and thus it is much more comfortable to fire at enemies. You can literally trace the trajectory of the projectile.

This is especially noticeable when shooting around the city, as you can see whether a projectile will fly through houses or not, in contrast to standard mode, where you have to navigate only on the changing color of the strip.

The mod works only for self-propelled guns, work in sniper mode for other types of equipment is not provided.

It was this mod that won (Wargaming Developers Contest - a developer competition from Wargaming). therefore the mod is not prohibited, and moreover, it is approved by the developers.

The main features and benefits of this version:

  • switching aiming mode ( default key G) - standard and " ACS of a healthy person";
  • zoom for art - aka zoom mod, that is, you can move the camera as far as possible from your tank and see almost the entire battlefield;
  • ignoring obstacles - the camera will not jump over obstacles in the path of the projectile (enabled by default);
  • fire spotter- have you noticed that when an enemy is hiding on a hill, the projectile flies much higher? This is due to the fact that if there is no target, the aiming point is shifted far behind the tank; in such cases, the spotter forces the projectiles to fly along a lower trajectory;
  • Expert mode- now the skill is triggered a few seconds after the damage inflicted on the enemy, also the perk is now activated after the command "support with fire".

How do I install Battle Assistant?

  1. Download the file.
  2. Run, unzip the insides.
  3. Everything inside must be copied to the folder: World_of_Tanks / mods / 1.4.0.0 /

How to use the crosshair in the game?

It doesn't take much cleverness to figure out how to enable Battle Assistant in battle. There are two modes of operation:

  1. standard,
  2. improved (mod).

You can switch between them using the key G.

How do I customize the mod?

In folder World_of_Tanks \ res_mods \ 1.4.0.0 \ scripts \ client \ gui \ mods there is a file mod_battle_assistant.txt... We need it, we open it with a regular notepad. Below is a list of parameters:

  • enabled: true / false - on, off the mod;
  • keys:"" # list of used keys, do not remove quotes! KEY_J - change to a button convenient for you if you want. For G, for example, this would be KEY_G.
  • zoomSpeed: 3.0 - zoom speed;
  • ignoreObstacles: true / false - ignore obstacles
  • expert:
    • enabled: true
  • gunner:
    • enabled: true

What to do if Battle Assistant doesn't work?

  1. Check if the installation is correct, namely:
    1. the folder where you placed the files;
    2. the version number of the folder inside res_mods, should be 1.4.0.0;
    3. the folder in which the game is located must be written in English.
  2. If you changed the settings of the mod, possibly screwed up somewhere, restore the original version.
  3. The mod is guaranteed to work on a clean client, if you collect your own mods, perhaps it conflicts with other add-ons.

For comparison, let's take a look at the before and after screenshots.

Battle Assistant mod for World of Tanks 1.1.0 was originally developed for participation in the competition best modifications for Game. As a result, Battle Assistant won this competition, and the players received very useful mod, which gives a lot of different additions and innovations to the game.

Battle Assistant is divided into three parts for each variant of the vehicle, the most widely used and very useful addition for those players who prefer to play arte - this is a healthy person's SPG Mod or an improved sight for artillery.

ACS mod of a healthy person

The sight aiming type on the SPG will completely change, now the sight will be clearer for you and similar to the sniper scope on other vehicle variants. With this sight, it will now be possible to very accurately target an enemy tank or a specific place on the tank. To enable the new sight mode, press the "G" key.

In the sight settings, you can set any key that will be convenient for you to turn on the sight.
Benefits of ACS for a healthy person

Very clear trajectory of the projectile
Convenient on city maps, where you will clearly see the target's range of fire
Can target any point on the tank
If the enemy leaves the spotlight, the aiming point will remain in the same place and you can close down and shoot

Helpful expert

The useless Expert perk will slightly improve.

Now the Expert turns on after a few seconds for the enemy to whom you have inflicted damage, or who have marked with the command "Support with fire".

The Expert perk must be learned from the commander, and the enemy tank must be within your radius of detection.
The mod only works with the expert perk enabled.
Spotting fire

If the enemy disappears from the light, on a hill against the background of the sky, a shot at the aiming point will fly much higher than the possible location of the enemy. This happens because the aiming marker is displaced from the initial point by about half a centimeter upward, and the sight has to be lowered from memory. Accurately aiming in this case is still quite difficult and requires certain skills and experience.
With the Spotter of fire installed, the mod will automatically adjust the sight in sniper mode against the background of the sky, so that in cases of an unexpected exit from the enemy because of the light, the shot will go a little lower and then he will reach the target.

The file res_mods \ 1.1.0 \ scripts \ client \ mods contains the battle_assistant.txt file, you can make various settings or turn off some version of the mod.

The Battle Assistant mod causes apprehension among many players, due to the fact that it gives a great advantage in battle and many think that you can get a ban for using it.

The healthy person's self-propelled gun mod is fully authorized by the developers and you can safely install it.

Installing Battle Assistant

Download and unzip the archive
Move the scripts folder to res_mods \ Game_version

Download

↓ Expand

  • the mod is sewn into the game;
  • there are alternatives from Ekspoint and reven86
The mod is now available in the game by default. To activate the mod, press the "G" button. But if the standard version does not suit you, try ours.

Download mod World of Tanks Battle Assistant for free without registration is a great mod for art that allows you to hit vehicles behind obstacles. This official sight (called the "healthy person's sight") is intended for SPGs and is not used on other vehicles.

Description

The Battle Assistant artillery sight makes it possible to see the place of the projectile hit as in a sniper scope. It does not replace the main sight, but complements it. When you press the "J" key while aiming (in the Russian layout "O"), the view appears sniper scope... In this case, the camera is located on the side of the approach of the projectile. See for yourself:

More screenshots:

With the help of the mod, you can easily hit the enemy's equipment in places behind vertical obstacles with holes (bridges, windows of houses). It is enough to find the enemy on the map, aim at him behind the obstacle, turn on the sight for the art battle assistant and wait for him to appear in the window of the house, go under the bridge and other places. Since it does not replace the standard ballistic sight, it is possible to use them together. This is a handy addition for gunners.

In addition, mod Battle Assistant handy when aiming at the enemy at close distances, especially when he is hiding behind cover and periodically peeks out or moves in fast mode. Standard sight in this regard, it is not convenient, there is no possibility of approaching when firing with direct fire.

How to use


When firing from an SPG with the left Alt key pressed, the camera is attached to the projectile. Makes the useless Expert perk slightly more useful. Now the Expert is activated after 3-4 seconds for the tank, which you have inflicted damage, or which has been marked with the command “Support with fire”. The Expert perk must be leveled at the commander, and enemy tank should be in the zone of its own light. Settings in the file mods / configs / battle_assistant / mod_battle_assistant.txt The mod must be activated at https://wotinspector.com/battleassistant The link will be available in the hangar in the notification center. Added modification settings in the hangar. For the settings to appear in the hangar, you need to additionally install wotmod from here https://bitbucket.org/P0LIR0ID/wot-modslist/downloads/ (the most recent version). Usually it is already installed if any modpacks or other mods with settings in the hangar were installed. If the file does not exist, the settings can still be edited manually.

Battle Assistant very useful mod for those who play in World game of Tanks (World of Tanks), also known as the self-propelled gun of a healthy person. This mod is an alternative version a standard (not always convenient) artillery sight, which allows you to aim at an enemy tank according to the principle of a sniper scope.

Benefits of using Battle Assistant
As you know, game cards in WOT are complex terrain, with an abundance of lowlands, ravines, city blocks, ruins and heaps of garbage, bridges and flyovers. All this makes it difficult for artillery to mold the enemy and ultimately leads to frequent flights, overshoots, or simply hits on buildings that may meet in the path of your projectile.

In view of the fact that artillery has a very long reload time, it is extremely important for victory to increase the percentage of hits on artillery as much as possible. After all, one accurate shot can seriously change the balance of forces in an important direction and prevent tanks from the enemy team from breaking through to you, or help your ally to overcome a dangerous area with minimal losses.

Using the Battle Assistant mod will increase the chance of hitting an enemy tank, especially in urban areas, with an abundance of buildings, bullet holes and various arches. Also, this mod will allow you to target more vulnerable spots of tanks and accurately put a projectile on the target when the enemy leaves you from around the corner in urban settings.

In general, if you play artillery and want to improve your hit rate, this mod will be simply irreplaceable for you.

Video review of the Battle Assistant mod

Installing and activating the Battle Assistant mod
1. Before installing the mod, make sure that the version of your game client matches the version of Battle Assistant.
2. Copy the contents of the archive to the folder:
WOT \ res_mods \ Client version \ scripts \ client \ gui \ mods folder
3. To activate this mod in battle, you must enter the artillery sight mode and then press the "J" key on your keyboard. If the mod is installed correctly, your artillery sight will switch to sniper mode.

Mod customization
The mod activation key "J" used in the mod by default, can be replaced with any other. Personally, I use the "G" key for convenience, since it is closer and you do not need to take your fingers off the control keys (WASD).
To change the "J" key to another, go to the folder with your client and find the mod_battle_assistant.txt file:
folder WOT \ res_mods \ *** \ scripts \ client \ gui \ mods \ mod_battle_assistant.txt

In the mod_battle_assistant.txt file we find the line "" and change J to any other, necessarily Latin letter. Don't touch the quotes! We reboot the client and you're done!

What to do if Battle Assistant doesn't work?
If you installed mod Battle Assistant but it doesn't work for you, then there are only 3 reasons for this.
1. The version of the Battle Assistant mod does not match the version of the game client. They must match. You can see the latest version of the mod on this page (in the title), and the version client WOT can be seen in the game client.
2. You installed the mod in the wrong folder. The res_mods folder may contain folders with mods for old versions. Battle Assistant must be installed in a folder with a number that exactly matches latest version client.
3. Install this mod after installing all other mods. As a rule, the Battle Assistant mod is used in conjunction with other modpacks: Protanki, Modpack Jova and others. These modpacks, when installed, first remove all previously installed modifications. Simply put, they overwrite everything earlier installed mods... Therefore, if you first install the Battle Assistant and then the Protanka modpack, then the Battle Assistant will not work, since it will be removed by the Protanka installer.

* Mods are up-to-date and tested for the current version of the WOT client. IN new version you may need to reinstall this mod. If there are any problems in the work, let us know in the comments.




Additional Information
License: Is free
Software developer: reven86
Supported OS: Windows 7, Windows 8
Interface language: Russian English
Update date: 2019-01-18
Program size: 220 kb

This mod was created specifically for the modding contest, which was held by Wargaming. He won, the author received a prize in the form of a small sum of money, and most importantly, Battle Assistant was officially approved by the game developers. The mod provides many interesting and useful features that will help you in battle. It is divided into types of vehicles, the most popular module is the improved sight for the artillery gun, which greatly simplifies the game with artillery.

Module "Useful Expert"

The Expert perk becomes more useful, it activates after 3-4 seconds for a tank that you marked with the "Support with fire" command or which you have already inflicted damage. For the module to work, the commander must have the "Expert" perk, and the enemy tank must be in the zone of its own light.

Module "ACS of a healthy person"

Changes the type of aiming for self-propelled guns, makes the sight more understandable and similar to the sniper mode on other types of tanks.

To switch to the new SPG mode and back, you need to press the "G" key or the middle mouse button in artillery mode. IMPORTANT. The middle mouse button should not be assigned to other actions in the game, otherwise problems may arise when exiting the art-sau mode. If this situation arises, reassign the key in the game or mod config.

Advantages of self-propelled guns of a healthy person:

Aiming at a specific part of the tank.

A clear trajectory of the projectile.

An overview of the shooting areas for city maps, the sight helps to aim at tanks even between houses.

The aiming point does not shift when the tank suddenly disappears from the light.

Here are examples of the module for the self-propelled gun, as it was before and as with the new sight:

Module "Spotting fire"

There are times when, right in front of a shot, an enemy standing on a hill suddenly disappears from the light. In such a situation, the trajectory of the shot automatically changes due to the fact that the aiming point shifts from the hill to the sky, becomes much farther and higher. After that, your shot is unlikely to reach the target, but simply misses.

The Battle Assistant mod, a spotter of fire, will help correct such situations, it automatically adjusts aiming against the sky so that the projectiles fired at a suddenly disappeared enemy will fly along a low trajectory. This will increase the chance of hitting an enemy tank.

The module works automatically in sniper mode, does not require additional activation.

Battle Assistant mod cheat or not?

No! As you can read from above, the mod won the official competition from the developers of World of Tanks - WGDC, i.e. fully approved. You cannot get a ban for it.

How to install the mod:

Unpack the archive into the game folder. Ready!

To customize it for ourselves, we work with the battle_assistant.txt file, which is located along the path WOT \ res_mods \ game version \ scripts \ client \ mods \ .. In it you can disable unnecessary modules, change their settings.

Important! Mod conflicts with UGN for art sau. You need to install it on top of any mod packs (i.e., first put the mod pack, then put the Battle Assistant on top with the replacement of files).

If Battle Assistant does not work for you, but you are sure that you installed everything correctly, check the name of the folder in which the game is located. If the folder is named in Russian - rename it to English and everything will work! Checked!